On sound insulation of pyramidal lattice sandwich structure

Published on Jan 15, 2019in Composite Structures5.407
路 DOI :10.1016/J.COMPSTRUCT.2018.10.013
Jie Liu12
Estimated H-index: 12
(GU: Guangzhou University),
Tingting Chen1
Estimated H-index: 1
(Hunan University)
+ 5 AuthorsYi Min Xie69
Estimated H-index: 69
(RMIT: RMIT University)
Sources
Abstract
Abstract Pyramidal lattice sandwich structure (PLSS) exhibits high stiffness and strength-to-weight ratio which can be effectively utilized for designing light-weight load bearing structures for ranging from ground to aerospace vehicles. While these structures provide superior strength to weigh ratio, their sound insulation capacity has not been well understood. The aim of this study is to develop numerical and experimental methods to fundamentally investigate the sound insulation property of the pyramidal lattice sandwich structure with solid trusses (PLSSST). A finite element model has been developed to predict the sound transmission loss (STL) of PLSSST and simulation results have been compared with those obtained experimentally. Parametric studies are then performed using the validated finite element model to investigate the effect of different parameters in pyramidal lattice sandwich structure with hollow trusses (PLSSHT), revealing that the pitching angle, the uniform thickness and the length of the hollow truss and the lattice constant have considerable effects on the sound transmission loss. Finally a design optimization strategy has been formulated to optimize PLSSHT in order to maximize STL while meeting mechanical property requirements. It has been shown that STL of the optimal PLSSHT can be increased by almost 10% at the low-frequency band. The work reported here provides useful information for the noise reduction design of periodic lattice structures.
Figures & Tables
Download
馃摉 Papers frequently viewed together
References53
Newest
#1Ping-Huan Tsai (NTHU: National Tsing Hua University)H-Index: 1
#2Hung-Yin Tsai (NTHU: National Tsing Hua University)H-Index: 1
Abstract A three-dimensional nanostructure of carbon material similar to a desert rose stone, named the carbon nano-flake ball, was fabricated by a single-step microwave plasma chemical vapor deposition process. Silicon substrate pretreated with different methods was used to grow carbon nano-flake balls and to control their coverage ratio. The dimension of single carbon nano-flake ball was found to be within 10鈥糾 and it was constructed from multiple nano-scale-thickness flakes at angles. In tur...
Source
#1Hanfeng Yin (Hunan University)H-Index: 19
#2Xiaofei Huang (Hunan University)H-Index: 1
Last. Chao Zhang (NPU: Northwestern Polytechnical University)H-Index: 139
view all 6 authors...
Abstract Biological tissues like bone, wood, and sponge possess hierarchical cellular topologies, which are lightweight and feature an excellent energy absorption capability. Here we present a system of bio-inspired hierarchical honeycomb structures based on hexagonal, Kagome, and triangular tessellations. The hierarchical designs and a reference regular honeycomb configuration are subjected to simulated in-plane impact using the nonlinear finite element code LS-DYNA. The numerical simulation re...
Source
#1Jie Liu (GU: Guangzhou University)H-Index: 12
#2Xiaonan Fan (Hunan University)H-Index: 2
Last. Gang Zhao (Hunan University)H-Index: 3
view all 6 authors...
Abstract: Structure/material requires simultaneous consideration of both its design and manufacturing processes to dramatically enhance its manufacturability, assembly and maintainability. In this work, a novel design framework for structural/material with a desired mechanical performance and compelling topological design properties achieved using origami techniques is presented. The framework comprises four procedures, including topological design, unfold, reduction manufacturing, and fold. The...
Source
#1Abdul Haseeb (PIEAS: Pakistan Institute of Engineering and Applied Sciences)H-Index: 2
#2Muhammad Tufail (PIEAS: Pakistan Institute of Engineering and Applied Sciences)H-Index: 18
Last. Waqas Ahmed (PIEAS: Pakistan Institute of Engineering and Applied Sciences)H-Index: 10
view all 4 authors...
Abstract Online feedback path modeling and neutralization (FBPMN) is vital in active noise control (ANC) systems to ensure stability and elevate performance in non-stationary environments. In this paper, we propose a modified variable step size (VSS) method for online FBPMN in single-channel ANC systems which incorporates three adaptive filters; a noise control filter, a FBPMN filter, and a linear predictor for disturbance removal. In the proposed method, distinct VSS LMS algorithms are used for...
Source
Lightweight structures with multi-functions such as electromagnetic wave absorption and excellent mechanical properties are required in spacecraft. A three-dimensional metamaterial absorber consisting of honeycomb and resistive films was proposed and fabricated through 3D printing and silk-screen printing technology. According to simulation and experiment results, the present three-dimensional metamaterial absorber can realize an absorptivity of more than 90% in a wide band of 3.53鈥24.00鈥塆Hz, an...
Source
#1Jie Liu (Hunan University)H-Index: 12
#2Shanqing Xu (RMIT: RMIT University)H-Index: 18
Last. Yi Min Xie (RMIT: RMIT University)H-Index: 69
view all 4 authors...
Abstract. In this study the mechanical behaviour of a creased thin strip under opposite-sense bending was investigated. It was found that a simple crease, which led to the increase of the second moment of area, could significantly alter the overall mechanical behaviour of a thin strip, for example the peak moment could be increased by 100聽times. The crease was treated as a cylindrical segment of a small radius. Parametric studies demonstrated that the geometry of the strip could strongly influen...
Source
#1Binyu Zhang (PolyU: Hong Kong Polytechnic University)H-Index: 7
#2Chi Sun Poon (PolyU: Hong Kong Polytechnic University)H-Index: 102
Abstract This study aimed to develop an effective surface pre-treatment method for recycled rubber particles to improve the sound insulation properties of rubberized lightweight aggregate concrete. In this study, the control lightweight aggregate concrete mixture was prepared using lightweight expand clay aggregate as the coarse aggregate and furnace bottom ash (FBA) as the fine aggregate. The results showed that when all the FBA was replaced by the recycled rubber aggregate, the overall sound r...
Source
#1Jie Zhou (University of Southampton)H-Index: 10
#2Xin Zhang (HKUST: Hong Kong University of Science and Technology)H-Index: 98
Last. Yi Fang (HKUST: Hong Kong University of Science and Technology)H-Index: 10
view all 3 authors...
An analytical model is built to predict the acoustic fields of acoustic metasurfaces. The acoustic fields are investigated for a Gaussian sound beam incident on the acoustic metasurfaces. The Gaussian sound beam is decomposed into a set of discrete elementary plane waves. The diffraction caused by the acoustic metasurfaces can be obtained using this analytical model, which is validated with the numerical simulations for the different incident angles of the Gaussian sound beam. This model overcom...
Source
#1Xiangyang Li (HIT: Harbin Institute of Technology)H-Index: 11
#2Kaiping Yu (HIT: Harbin Institute of Technology)H-Index: 19
Last. Haiyang Song (HIT: Harbin Institute of Technology)H-Index: 4
view all 5 authors...
Abstract Composite sandwich structures are extensively applied in automotive, marine, aircraft because of superior stiffness-to-weight ratios. These structures are invariably exposed to the thermal and noise environment in their service life especially as a component of the hypersonic aircraft. The paper is originally focused on the sound transmission loss (STL) of the sandwich panels constituted of orthotropic materials in thermal environment. Firstly, the governing equations are obtained by ap...
Source
#2Feihao Li (Xi'an Jiaotong University)H-Index: 1
Abstract An ultra-lightweight sandwich panel with perforated honeycomb-corrugation hybrid (PHCH) core is innovated as a novel sound absorber, which demonstrates great sound absorption as well as excellent mechanical performance. Based on the hybrid-cored sandwich panel, small perforations of different diameters distributed heterogeneously on both the top facesheet and the corrugation are introduced to obtain perfect sound absorption at low frequencies with almost no deterioration in mechanical p...
Source
Cited By35
Newest
#1Tengteng Zheng (SEU: Southeast University)H-Index: 1
#2Shuai Li (HIT: Harbin Institute of Technology)H-Index: 4
Last. Caiqi Zhao (SEU: Southeast University)H-Index: 1
view all 5 authors...
Abstract null null In this paper, two types of the composite XX-type lattice sandwich structure (XX (鈪) and XX (鈪)) were made of panels (medium-density fiberboard and plywood) and core (birch) by using a type of insertion-glue method. An out-of-plane compressive test and a short beam shear test were carried out to investigate the failure modes, mechanical and energy absorption properties of the composite XX-type lattice sandwich structure. Results showed that the compression and short beam shear...
Source
#1Xi Wang (Dalian Jiaotong University)
#2Ruixian Qin (Dalian Jiaotong University)
Last. Bingzhi Chen (Dalian Jiaotong University)
view all 3 authors...
Abstract null null The progress of additive manufacturing (AM) technique broadens the conceivement and adoption of new types of lattice structures effectively. A new lattice structure, drawing on inspiration from nature, was developed and manufactured via selective laser melting (SLM) to explore the effects of printing parameters on densification and mechanical performance. Compressive experiments were conducted by universal testing machine and Split Hopkinson Pressure Bar (SHPB) system to asses...
Source
Carbon fiber-reinforced plastics (CFRP)-packaged fiber Bragg grating (FBG) sensors are widely used in full-scale structural testing of wind turbine blades (WTBs). However, the specific process to make CFRP-packaged FBG sensors, such as packaging, bonding, welding, etc., are mainly manually operated, and no unified standard or rule has been formed yet. Non-standard specific processes, coupled with complex stress distribution, unstable working environments, etc., result in the CFRP-packaged FBG se...
Source
#5Chun Liang Zhang (GU: Guangzhou University)H-Index: 5
Although Miura origami has excellent planar expansion characteristics and good mechanical properties, its congenital flaws, e.g., open sections leading to weak out-of-plane stiffness and constituting the homogenization of the material, and resulting in limited design freedom, should also be taken seriously. Herein, two identical Miura sheets, made of carbon fiber/epoxy resin composite, were bonded to form a tubular structure with closed sections, i.e., an origami tube. Subsequently, the dynamic ...
Source
#1Kai LongH-Index: 9
#2Zhuo ChenH-Index: 1
Last. Nouman SaeedH-Index: 1
view all 5 authors...
Source
#1Guilin Wen (GU: Guangzhou University)H-Index: 23
#2He Junfeng (GU: Guangzhou University)H-Index: 2
Last. Lin Yu (GU: Guangzhou University)H-Index: 1
view all 4 authors...
Vibration isolation systems with quasi-zero stiffness (QZS) performance have been widely studied because of their characteristics: high static stiffness and low dynamic stiffness. However, the effective displacement range of QZS is usually so small that strongly limits its application existing in real engineering. Thus, this study鈥 main innovation is to attempt to expand the effective displacement range of the QZS system via a semi-active control strategy. We first present a novel quasi-zero sti...
Source
#1Zhen-Kun Guo (University of Auckland)H-Index: 2
#2Guobiao Hu (University of Auckland)H-Index: 15
Last. Lihua Tang (University of Auckland)H-Index: 37
view all 5 authors...
This article is devoted to investigating sound insulation performance of a simply supported sandwich plate with an hourglass lattice core. The governing equations of lattice core sandwich plate are...
Source
#1Yanis Balit (脡cole Polytechnique)H-Index: 4
#2Pierre Margerit (脡cole Polytechnique)H-Index: 3
Last. Andrei Constantinescu (脡cole Polytechnique)H-Index: 28
view all 4 authors...
Abstract null null The response of architectured structures is characterized by multi-scale kinematics, which complex relation and effect on the engineering load response is still not completely understood and therefore needs further investigations. More precisely, the lack of experimental methods enabling to provide multi-scale data remains a key issue. The paper presents an experimental and numerical analysis of crushing tests performed on thin-walled auxetic metallic lattices manufactured by ...
Source
#1Guilin Wen (Yanshan University)H-Index: 11
#2Chen Gaoxi (GU: Guangzhou University)
Last. Yi Min Xie (RMIT: RMIT University)H-Index: 69
view all 6 authors...
Abstract null null Origami-based metamaterial has shown remarkable mechanical properties rarely found in natural materials, but achieving tailored multistage stiffness is still challenging. We propose a novel zigzag-base stacked-origami (ZBSO) metamaterial with tailored multistage stiffness based on crease customization and stacking strategies. A high precision finite element (FE) model to identify the stiffness characteristics of the ZBSO metamaterial has been established, and its accuracy is v...
Source
#1Chenyang Xi (SJTU: Shanghai Jiao Tong University)
#2Xiaosong Zhu (SJTU: Shanghai Jiao Tong University)
Last. Hui Zheng (SJTU: Shanghai Jiao Tong University)H-Index: 14
view all 3 authors...
This article attempts to enhance the low-frequency vibration suppression performance of corrugated-core sandwich beams. Multiple local resonators are introduced into the corrugated-core sandwich be...
Source
This website uses cookies.
We use cookies to improve your online experience. By continuing to use our website we assume you agree to the placement of these cookies.
To learn more, you can find in our Privacy Policy.