Injector

Vapor-compression evaporation

Condensation

Heat transfer

Distillation

Materials science

Chromatography

Biochemistry

Multiple-effect distillation

Mass transfer

Low-temperature thermal desalination

Thermodynamics

Vacuum distillation

Physics

Membrane

Desalination

Steam turbine

Superheated steam

Chemistry

Mechanics

The single-phase and two-phase flow models are developed and compared for the performance evaluation of a steam ejector for the multi-effect distillation with thermal vapour compression (MED-TVC) seawater desalination system. The results show that a single-phase flow model with ignoring the phase change predicts an unphysical temperature of the steam in the supersonic flow with the minimum value of approximately 122 K, which raises the query of the formation of the ice. The two-phase wet steam model corrects the distribution of the flow parameter by predicting the heat and mass transfer during the phase change. The steam achieves the first nonequilibrium condensation process inside the primary nozzle and another four alternating condensation and re-evaporation processes. The single-phase flow model under-predicts the entropy loss coefficient by approximately 15% than the two-phase wet steam model. The performance comparison is achieved against the single-phase model to present the accuracy of the two-phase model for the steam ejector simulation. This demonstrates that the nonequilibrium condensation is essential for the performance analysis of steam ejectors for MED-TVC seawater desalination system.

Performance of steam ejector with nonequilibrium condensation for multi-effect distillation with thermal vapour compression (MED-TVC) seawater desalination system