Electrical engineering

Geology

Brittleness

Bend radius

Nanotechnology

Electrical conductor

Sintering

Shell (structure)

Bending

Oceanography

Electronic circuit

Engineering

Conductivity

Physical chemistry

Nanoparticle

Composite material

Chemistry

Materials science

Particle (ecology)

Flexible electronics

Advanced Functional Materials

As a critical part of flexible electronics, flexible circuits inevitably work in a dynamic state, which causes electrical deterioration of brittle conductive materials (i.e., Cu, Ag, ITO). Recently, gallium‐based liquid metal particles (LMPs) with electrical stability and self‐repairing have been studied to replace brittle materials owing to their low modulus and excellent conductivity. However, LMP‐coated Ga 2 O 3 needs to activate by external sintering, which makes it more complicated to fabricate and gives it a larger short‐circuit risk. Core–shell structural particles (Ag@LMPs) that exhibit excellent initial conductivity(8.0 Ω sq −1 ) without extra sintering are successfully prepared by coating nanosilver on the surface of LMPs through in situ chemical reduction. The critical stress at which rigid Ag shells rupture can be controlled by adjusting the Ag shell thickness so that LM cores with low moduli can release, achieving real‐time self‐repairing (within 200 ms) under external destruction. Furthermore, a flexible circuit utilizing Ag@LMPs is fabricated by screen printing, and exhibits outstanding stability and durability (R/R 0 &lt; 1.65 after 10 000 bending cycles in a radius of 0.5 mm) because of the functional core–shell structure. The self‐repairable Ag@LMPs prepared in this study are a candidate filler for flexible circuit design through multiple processing methods.

A Novel Conductive Core–Shell Particle Based on Liquid Metal for Fabricating Real‐Time Self‐Repairing Flexible Circuits