Space charge

Electrical engineering

Physics

Electron

Quantum efficiency

Energy conversion efficiency

Photovoltaics

Semiconductor

Engineering

Perovskite (structure)

Voltage

Materials science

Photocurrent

Photovoltaic system

Quantum mechanics

Chemical engineering

Optoelectronics

Open-circuit voltage

Doping

Advanced Materials

2D perovskites stabilized by alternating cations in the interlayer space (ACI) represent a very new entry as highly efficient semiconductors for solar cells approaching 15% power conversion efficiency (PCE). However, further improvements will require understanding of the nature of the films, e.g., the thickness distribution and charge‐transfer characteristics of ACI quantum wells (QWs), which are currently unknown. Here, efficient control of the film quality of ACI 2D perovskite (GA)(MA) n Pb n I 3 n +1 (〈 n 〉 = 3) QWs via incorporation of methylammonium chloride as an additive is demonstrated. The morphological and optoelectronic characterizations unambiguously demonstrate that the additive enables a larger grain size, a smoother surface, and a gradient distribution of QW thickness, which lead to enhanced photocurrent transport/extraction through efficient charge transfer between low‐ n and high‐ n QWs and suppressed nonradiative charge recombination. Therefore, the additive‐treated ACI perovskite film delivers a champion PCE of 18.48%, far higher than the pristine one (15.79%) due to significant improvements in open‐circuit voltage and fill factor. This PCE also stands as the highest value for all reported 2D perovskite solar cells based on the ACI, Ruddlesden–Popper, and Dion–Jacobson families. These findings establish the fundamental guidelines for the compositional control of 2D perovskites for efficient photovoltaics.

Compositional Control in 2D Perovskites with Alternating Cations in the Interlayer Space for Photovoltaics with Efficiency over 18%