Tailored interphase and thermal interface resistance of self‐assembled thermally reduced graphene oxide–polyamide hybrid/epoxy composites with enhanced thermal conductivity

Published on Aug 15, 2019in Journal of Applied Polymer Science2.52
· DOI :10.1002/APP.47826
Bo Li5
Estimated H-index: 5
(Huada: Beijing University of Chemical Technology),
Di Wu1
Estimated H-index: 1
(Huada: Beijing University of Chemical Technology)
+ 3 AuthorsXiaoping Yang54
Estimated H-index: 54
(Huada: Beijing University of Chemical Technology)
Sources
Abstract
📖 Papers frequently viewed together
15 Citations
2014
4 Authors (Yimin Yao, ..., Jianbin Xu)
60 Citations
References31
Newest
#1An LiH-Index: 5
#2Cong ZhangH-Index: 5
Last. Yang-Fei ZhangH-Index: 5
view all 3 authors...
Graphene nanosheets filled epoxy composites (GNS/Epoxy) were prepared at different filler loading levels from 0.25 to 3.00 wt %. A fast dispersion method as short as 5 min is employed to disperse GNS in epoxy matrix, which was enough for the homogeneous dispersion of GNS with the help of high ultrasonic frequency of 100 kHz and power of 200 W and high heat treatment temperature of 70 °C. The maximum electrical conductivity and thermal conductivity of the composites achieved 0.058 S m−1 and 0.57 ...
10 CitationsSource
#1Fanyu Zhao (SEU: Southeast University)H-Index: 1
#2Liangzhong LingH-Index: 1
Last. Zhenhua Ni (SEU: Southeast University)H-Index: 62
view all 5 authors...
The two-dimensional structure and unique properties make graphene an efficient candidate to strengthen the electrical and mechanical characteristics of polymer composites. The effectiveness for improving the electrical property of composites strongly depends on the size, electrical conductivity and dispersion of graphene fillers in polymer matrix. Here, we demonstrate that Raman spectroscopy can be used to study the dispersion of conductive graphene layers in epoxy composite. The graphene area f...
9 CitationsSource
#1Rasheed Atif (Northumbria University)H-Index: 9
#2Islam Shyha (Northumbria University)H-Index: 15
Last. Fawad Inam (Northumbria University)H-Index: 26
view all 3 authors...
Monolithic epoxy, because of its brittleness, cannot prevent crack propagation and is vulnerable to fracture. However, it is well established that when reinforced—especially by nano-fillers, such as metallic oxides, clays, carbon nanotubes, and other carbonaceous materials—its ability to withstand crack propagation is propitiously improved. Among various nano-fillers, graphene has recently been employed as reinforcement in epoxy to enhance the fracture related properties of the produced epoxy–gr...
164 CitationsSource
#1Dawei Liu (Huada: Beijing University of Chemical Technology)H-Index: 6
#2Gang Li (Huada: Beijing University of Chemical Technology)H-Index: 17
Last. Xiaoping Yang (Huada: Beijing University of Chemical Technology)H-Index: 54
view all 4 authors...
Abstract A pelote-like hybrid particle was fabricated via self-assembly of PA microparticles and epoxy functionalized carbon nanotubes (MWNTs-EP), and the effects of interlayer films containing self-assembled hybrid particles (PA-MWNTs-EP) on interlaminar shear property and fracture toughness of CFRP composites were studied. The spontaneous self-assembly was ascribed to electrostatic adsorption between MWNTs-EP and PA microparticles. Remarkable improvements in interlaminar shear strength (ILSS) ...
18 CitationsSource
#1Dawei Liu (Huada: Beijing University of Chemical Technology)H-Index: 6
#2Gang Li (Huada: Beijing University of Chemical Technology)H-Index: 17
Last. Xiaoping Yang (Huada: Beijing University of Chemical Technology)H-Index: 54
view all 6 authors...
Abstract Epoxy matrix toughened by polyethersulfone (PES) and polyamide (PA) microparticles was designed and the in-situ interlaminar toughened carbon fiber/epoxy composites were fabricated. Synergistic toughening effect of PES and PA on epoxy matrix was achieved due to semi-IPN structure of PES toughened matrix and uniform dispersion of PA microparticles. Shear-calender orientation of PA microparticles was found during prepreg processing and the microparticles remained on the surface of prepreg...
12 CitationsSource
#1Pradip Kumar (KIST: Korea Institute of Science and Technology)H-Index: 19
#2Seunggun Yu (KIST: Korea Institute of Science and Technology)H-Index: 21
Last. Chong Min Koo (KIST: Korea Institute of Science and Technology)H-Index: 40
view all 6 authors...
Abstract In this work, for the first time we fabricated highly self-aligned large-area reduced graphene oxide/poly (vinylidene fluoride- co -hexafluoropropylene) (rLGO/PVDF-HFP) composite films through simple solution casting followed by low temperature chemical reduction process. The resulting free-standing rLGO/PVDF-HFP composite thin film revealed excellent electrical conductivity of ∼3000 S/m and ultrahigh in-plane thermal conductivity of ∼19.5 W/mK at rLGO content of 27.2 wt %. This ultrahi...
115 CitationsSource
#1Peng Lv (NUPT: Nanjing University of Posts and Telecommunications)H-Index: 17
#2Xiaowen Tan (NUPT: Nanjing University of Posts and Telecommunications)H-Index: 4
Last. Wei Wei (NUPT: Nanjing University of Posts and Telecommunications)H-Index: 20
view all 6 authors...
Abstract Three-dimensional (3D) graphene structure exhibits promising potential in thermal interface materials (TIMs) due to the continuous network structure and the high thermal conductivity of graphene. Nevertheless, the very low density and the high porosity of the 3D graphene monoliths usually lead to poor thermal transport performance. To overcome these problems, we fabricated the graphene/carbon nanotube (Gr/CNT) aerogels by a synergistic assembly strategy. The entangled CNTs bond the grap...
83 CitationsSource
#1Alexandr V. Dolbin (NASU: National Academy of Sciences of Ukraine)H-Index: 1
#2Maria V. Khlistyuck (NASU: National Academy of Sciences of Ukraine)H-Index: 1
Last. Ana M. Benito (CSIC: Spanish National Research Council)H-Index: 50
view all 9 authors...
Abstract The influence of reduction temperatures on the structure and the sorption capacity of thermally reduced graphene (TRGO) has been investigated systematically. A set of TRGO materials were prepared by thermal treatment of parent graphene oxide (GO) at five temperatures ( T = 200, 300, 500, 700, and 900 °C). Investigations of these materials by X-ray diffraction, Raman spectroscopy and X-ray photoemission spectroscopy methods have shown that both the structure and the residual oxygen funct...
45 CitationsSource
#1Huiming Ning (Chongqing University)H-Index: 20
#2Jinhua Li (Chiba University)H-Index: 10
Last. Jianyu Zhang (Chongqing University)H-Index: 4
view all 8 authors...
Abstract By taking the advantage of the excellent mechanical properties and high specific surface area of graphene oxide (GO) sheets, we develop a simple and effective strategy to improve the interlaminar mechanical properties of carbon fiber reinforced plastic (CFRP) laminates. With the incorporation of graphene oxide reinforced epoxy interleaf into the interface of CFRP laminates, the Mode-I fracture toughness and resistance were greatly increased. The experimental results of double cantilever...
87 CitationsSource
#1Lulu Pan (Guilin University of Technology)H-Index: 8
#2Jianfeng Ban (SZU: Shenzhen University)H-Index: 4
Last. Jinhong Yu (CAS: Chinese Academy of Sciences)H-Index: 39
view all 8 authors...
Perylene tetracarboxylic anhydride (PTCDA) was reacted with 6-aminocaproic acid to form the corresponding perylene bisimide (PBI). PBI was used as the foundation for oligomerisation of glycidol in a ring-opening reaction of glycidol leading to a hyper branched, water-soluble glycidol derivative of perylene (PBI-HPG). PBI-HPG was bound to the reduced graphene oxide via π–π stacking resulting in a compound termed PBI-HPG/RGO. The structure and morphology of PBI-HPG/RGO were investigated by infrare...
21 CitationsSource
Cited By3
Newest
#1Fan Su (ECUST: East China University of Science and Technology)H-Index: 1
#2Ling Zhang (ECUST: East China University of Science and Technology)H-Index: 29
Last. Chunzhong Li (ECUST: East China University of Science and Technology)H-Index: 97
view all 3 authors...
Source
#1Karteek Boga (Indian Institute of Chemical Technology)H-Index: 2
#2Chepuri R.K. Rao (Indian Institute of Chemical Technology)H-Index: 17
Last. Kattimuttathu I. Suresh (Indian Institute of Chemical Technology)H-Index: 11
view all 3 authors...
1 CitationsSource
#1Neeraj Sharma (Jamia Millia Islamia)H-Index: 49
#2Mohd. Arif (Jamia Millia Islamia)H-Index: 12
Last. Arun Singh (Jamia Millia Islamia)H-Index: 14
view all 6 authors...
Abstract In the present investigation we report a comparative study of Graphene Oxide (GO) in regard to its bandgap variations arising due to different reduction methods such as thermal reduction (Heating), electrical reduction (Voltage Application) and chemical reduction (Hydrazine hydrate). This study reveals that among the GO three reduction method studied the voltage application is the most efficient one. It is found that band gap increases with decreasing carbon to oxygen (C/O) ratio and is...
16 CitationsSource