A wideband reflective polarization converter based on metasurface is proposed in this letter. This converter can transform a linearly polarized (LP) incident electromagnetic (EM) wave into its orthogonal LP reflection wave in a lower band, and a circularly polarized (CP) reflection wave in a higher band. The unit cell of this converter is comprised of two meander lines and one cut wire printed on a dielectric substrate, backed with metallic ground sheet. The simulation results show that the y / x -polarized incident EM wave can be converted to the x/y -polarized reflected wave over a fractional bandwidth of 59.6% from 6.53 to 12.07 GHz with a polarization conversion ratio over 0.88. Besides, the y / x -polarized incident EM wave is converted to a CP reflected wave from 13.70 to 15.60 GHz (a fractional bandwidth of 13.0%). To verify the polarization conversion performance, a sample consisting of 30 × 30 unit cells is fabricated and measured. The experimental and simulation results obtained are in a reasonable agreement, which verifies the properties of the design.