Designing multi-layer graphene-based assemblies for enhanced toughness in nacre-inspired nanocomposites

Published on Jun 7, 2016
· DOI :10.1039/C6ME00022C
Wenjie Xia20
Estimated H-index: 20
(NU: Northwestern University),
Jake Song8
Estimated H-index: 8
(NU: Northwestern University)
+ 2 AuthorsSinan Keten34
Estimated H-index: 34
(NU: Northwestern University)
Sources
Abstract
Polymers reinforced with multi-layer graphene (MLG) phases are promising candidates for new materials with high modulus, strength and toughness. Drawing inspiration from nacre's layered “brick and mortar” structure, here we propose molecular scale design strategies to improve the mechanical performance of MLG–polymer layer-by-layer nanocomposites. We present a coarse-grained molecular dynamics (CG-MD) study of interfacial failure mechanisms of MLG domains embedded in a poly(methyl methacrylate) (PMMA) matrix through pull-out simulations. Our simulations reveal two distinct deformation and failure mechanisms that greatly influence the toughness and energy dissipation of the system: pull-out failure, which occurs along the MLG–PMMA interface, and yielding failure, which occurs within the graphitic phase through the sliding of staggered graphene sheets. For any length of the graphitic assembly, the energy dissipated per layer from MLG yielding is greater than that of MLG pull-out. Theoretical continuum analysis further reveals that there exists a critical number of layers of graphene, beyond which the failure mode changes from yielding to pull-out. Our modeling framework provides effective strategies to design graphene–polymer layered nanocomposites with optimal toughness, and advance the mechanical performance of nanomaterials.
📖 Papers frequently viewed together
23.9k Citations
200841.84Science
4 Authors (Changgu Lee, ..., James Hone)
13.9k Citations
20158.82Carbon
4 Authors (Luis Ruiz, ..., Sinan Keten)
97 Citations
References48
Newest
#1Wenjie Xia (NU: Northwestern University)H-Index: 20
#2Luis Ruiz (NU: Northwestern University)H-Index: 9
Last. Sinan Keten (NU: Northwestern University)H-Index: 34
view all 4 authors...
Multi-layer graphene assemblies (MLGs) or fibers with a staggered architecture exhibit high toughness and failure strain that surpass those of the constituent single sheets. However, how the architectural parameters such as the sheet overlap length affect these mechanical properties remains unknown due in part to the limitations of mechanical continuum models. By exploring the mechanics of MLG assemblies under tensile deformation using our established coarse-grained molecular modeling framework,...
40 CitationsSource
#1Xiaoding Wei (NU: Northwestern University)H-Index: 24
#2Zhaoxu Meng (NU: Northwestern University)H-Index: 13
Last. Horacio D. Espinosa (NU: Northwestern University)H-Index: 75
view all 9 authors...
Understanding the deformation mechanisms in multilayer graphene (MLG), an attractive material used in nanodevices as well as in the reinforcement of nanocomposites, is critical yet challenging due to difficulties in experimental characterization and the spatiotemporal limitations of atomistic modeling. In this study, we combine nanomechanical experiments with coarse-grained molecular dynamics (CG-MD) simulations to elucidate the mechanisms of deformation and failure of MLG sheets. Elastic proper...
64 CitationsSource
#1Chen Shao (NU: Northwestern University)H-Index: 6
#2Sinan Keten (NU: Northwestern University)H-Index: 34
Layered assemblies of polymers and graphene derivatives employ nacre’s tested strategy of intercalating soft organic layers with hard crystalline domains. These layered systems commonly display elastic properties that exceed simple mixture rule predictions, but the molecular origins of this phenomenon are not well understood. Here we address this issue by quantifying the elastic behavior of nanoconfined polymer layers on a model layered graphene-polymer nanocomposite. Using a novel, validated co...
25 CitationsSource
#1Wenjie Xia (NU: Northwestern University)H-Index: 20
#2Sinan Keten (NU: Northwestern University)H-Index: 34
Abstract Changes in the mechanical properties of polymer thin films due to substrate and free surfaces determine the performance of soft nanomaterials. Here we systematically investigate how these interfaces influence the elasticity of supported polymer thin films. Our simulation results demonstrate that the substrate–film interfacial interaction has a strong effect on the elastic response of the films, in which the modulus increases with the strength of interfacial interaction with a nonlinear ...
24 CitationsSource
#1Li YangH-Index: 6
#2Bosheng LiH-Index: 32
Last. Xing Wang DengH-Index: 131
view all 9 authors...
Nature Communications 6: Article number: 7309 (2015); Published online: 12 June 2015; Updated: 12 August 2015. In the last paragraph of the Discussion section in this Article, the hybrid Ler & C24 was incorrectly referred to as Ler & Col-0. The following is the correct sentence: ‘The F1 hybrids from two combinations (Col-0 & C24 and Ler & C24), which exhibit heterosis for biomass11,14, show no heterosis for biotrophic bacteria defence in our study (Supplementary Fig.
294 CitationsSource
#1Hongli Zhu (UMD: University of Maryland, College Park)H-Index: 52
#2Shuze Zhu (UMD: University of Maryland, College Park)H-Index: 25
Last. Teng Li (UMD: University of Maryland, College Park)H-Index: 44
view all 8 authors...
The quest for both strength and toughness is perpetual in advanced material design; unfortunately, these two mechanical properties are generally mutually exclusive. So far there exists only limited success of attaining both strength and toughness, which often needs material-specific, complicated, or expensive synthesis processes and thus can hardly be applicable to other materials. A general mechanism to address the conflict between strength and toughness still remains elusive. Here we report a ...
133 CitationsSource
#1Paul F. Egan (CMU: Carnegie Mellon University)H-Index: 12
#2Robert Sinko (NU: Northwestern University)H-Index: 11
Last. Sinan Keten (NU: Northwestern University)H-Index: 34
view all 4 authors...
There are many examples in nature of biological materials having developed interesting mechanical properties to enhance their functional performance. Here, Egan et al. review these materials and how they can inspire the design of biomimetic mechanical systems.
104 CitationsSource
#1Robert Sinko (NU: Northwestern University)H-Index: 11
#2Sinan Keten (NU: Northwestern University)H-Index: 34
Abstract Cellulose nanocrystals (CNCs) are one of nature's most abundant structural material building blocks and possess outstanding mechanical properties including a tensile modulus comparable to Kevlar. It remains challenging to upscale these properties in CNC neat films and nanocomposites due to the difficulty of characterizing interfacial bonding between CNCs that governs stress transfer under deformation. Here we present new analyses based on atomistic simulations of shear and tensile failu...
40 CitationsSource
#1Luis Ruiz (NU: Northwestern University)H-Index: 9
#2Wenjie Xia (NU: Northwestern University)H-Index: 20
Last. Sinan Keten (NU: Northwestern University)H-Index: 34
view all 4 authors...
Abstract Graphene is the strongest and highest weight-to-surface ratio material known, rendering it an excellent building block for nanocomposites. Multi-layer graphene (MLG) assemblies have intriguing mechanical properties distinct from the monolayer that remain poorly understood due to spatiotemporal limitations of experimental observations and atomistic modeling. To address this issue, here we establish a coarse-grained molecular dynamics (CG-MD) model of graphene using a strain energy conser...
97 CitationsSource
#1Xu Cheng (NU: Northwestern University)H-Index: 2
#2Karl W. Putz (NU: Northwestern University)H-Index: 19
Last. L. Catherine Brinson (NU: Northwestern University)H-Index: 45
view all 4 authors...
: The properties of polymers near an interface are altered relative to their bulk value due both to chemical interaction and geometric confinement effects. For the past two decades, the dynamics of polymers in confined geometries (thin polymer film or nanocomposites with high-surface area particles) has been studied in detail, allowing progress to be made toward understanding the origin of the dynamic effects near interfaces. Observations of mechanical property enhancements in polymer nanocompos...
68 CitationsSource
Cited By28
Newest
Source
#1M. A. N. Dewapriya (Carleton University)H-Index: 1
#1M.A.N. Dewapriya (Carleton University)H-Index: 10
Last. Ronald E. Miller (Carleton University)H-Index: 34
view all 2 authors...
Abstract We conducted large-scale molecular dynamics (MD) simulations of ballistic impact tests on ultrathin aluminum and polyurea layers and their multilayer arrangements to investigate the energy absorption and deformation mechanisms at the nanoscale. In contrast to the results obtained from experiments conducted at the macroscale, our nanoscale simulations demonstrate that a polymer layer on the strike face is more effective in mitigating impact-induced damage. A polymer layer on the back fac...
3 CitationsSource
The development of armour systems with higher ballistic resistance and light weight has gained considerable attention as an increasing number of countries are recognising the need to build up advanced self-defence system to deter potential military conflicts and threats. Graphene is a two dimensional one-atom thick nanomaterial which possesses excellent tensile strength (130 GPa) and specific penetration energy (10 times higher than steel). It is also lightweight, tough and stiff and is expected...
Source
#1Yitao Wang (Clemson University)
#1Yitao Wang (Clemson University)
Last. Zhaoxu Meng (Clemson University)H-Index: 13
view all 2 authors...
Abstract Multilayer graphene sheets (MLGSs) are promising nano-reinforcements that can effectively enhance the properties of polymer matrices. Despite many studies on MLGSs-reinforced polymer nanocomposites, the effect of wrinkles formed in MLGSs on the reinforcement effect and the viscoelastic properties of polymer nanocomposites has remained unknown. In this study, building upon previously developed coarse-grained models of MLGSs and poly(methyl methacrylate) coupled with molecular dynamics si...
Source
#1Jie Yang (SCUT: South China University of Technology)H-Index: 1
#2Daniel Custer (Clemson University)H-Index: 1
Last. Xiaohu Yao (SCUT: South China University of Technology)H-Index: 14
view all 5 authors...
Abstract Incorporating graphene nanosheets into a polymer matrix is a promising way to utilize the remarkable electronic, thermal, and mechanical properties of graphene. However, the underlying mechanisms near the graphene-polymer interface remain poorly understood. In this study, we employ coarse-grained molecular dynamics (MD) simulations to investigate the nanoscale mechanisms present in graphene-reinforced polycarbonate (GRPC) nanocomposites and the effect of those mechanisms on GRPC’s mecha...
1 CitationsSource
#1Qingping Sun (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 8
#2Guowei Zhou (OSU: Ohio State University)H-Index: 11
Last. Xuming Su (Ford Motor Company)H-Index: 18
view all 5 authors...
Abstract A bottom-up multi-scale modeling approach is used to develop an Integrated Computational Materials Engineering (ICME) framework for carbon fiber reinforced polymer (CFRP) composites, which has the potential to reduce development to deployment lead time for structural applications in lightweight vehicles. In this work, we develop and integrate computational models comprising of four size scales to fully describe and characterize three types of CFRP composites. In detail, the properties o...
6 CitationsSource
#1YongChao Wang (USTC: University of Science and Technology of China)H-Index: 2
#2YinBo Zhu (USTC: University of Science and Technology of China)H-Index: 17
Last. HengAn Wu (USTC: University of Science and Technology of China)H-Index: 35
view all 4 authors...
Abstract Experiments showed that the fracture toughness of silicon carbide (SiC) ceramics can be enhanced by adding graphene-based fillers. To understand the toughening mechanism and thoroughly explore the toughening potential, we used a multiscale approach combined with molecular dynamics (MD) simulations to theoretically study the correlation between the toughening effect and the microstructure parameters of SiC/graphene lamellar composite. MD simulations demonstrated that the pull-out force c...
2 CitationsSource
#1Rui Shu (Southwest Jiaotong University)H-Index: 4
#2Xiaosong Jiang (Southwest Jiaotong University)H-Index: 12
Last. Zhiping Luo (FSU: Fayetteville State University)H-Index: 66
view all 6 authors...
Abstract Natural materials usually have excellent performance for their special structures. Learning from the nature may catalyze the creation of artificial composites with unprecedented performance and functionalities. To realize this bio-inspired design idea on nano-carbon reinforced metal matrix composites, it is indispensable to understand and quantify the design principles of natural materials and consider the inherent characteristics of artificial materials and conditions of engineering ap...
6 CitationsSource
#1Tianjiao Li (NU: Northwestern University)H-Index: 2
#2Zhaoxu Meng (Clemson University)H-Index: 13
Last. Sinan Keten (NU: Northwestern University)H-Index: 34
view all 3 authors...
Abstract Graphene oxide (GO) is a promising building block for nanocomposites due to its excellent mechanical properties and tunable interfacial interactions with polymers. While experiments have shown that GO sheets consist of graphitic regions clustering into patches and oxidized regions constituting the remaining areas, the role that these heterogeneous patches play on interfacial and mechanical properties of GO reinforced nanocomposites have not yet been investigated. To address this issue a...
8 CitationsSource
#1Xiangzheng Jia (WHU: Wuhan University)H-Index: 3
#2Ze Liu (WHU: Wuhan University)H-Index: 27
Last. Enlai Gao (WHU: Wuhan University)H-Index: 19
view all 3 authors...
Graphene possesses extraordinary mechanical, electronic, and thermal properties, thus making it one of the most promising building blocks for constructing macroscopic high performance and multifunctional materials. However, the common material strength–ductility paradox also appears in the carbon-nanoarchitected materials and some of the key mechanical performance, for example, the tensile strength of graphene-based materials, are still far lower than that of graphene. Inspired by the exceptiona...
7 CitationsSource