Turbulence

Engineering

Heat transfer

Vortex generator

Materials science

Louver

Reynolds number

Airflow

Vortex

Duct (anatomy)

Drag

Heat exchanger

Mechanical engineering

Thermodynamics

Physics

Anatomy

Optics

Thermal

Environmental science

Medicine

Mechanics

Baffle

Pathology

Solar Energy

A vortex generator's ability to create secondary flow and accelerate rapid fluid mixing allows it to effectively improve thermal performance in a solar heat exchanger duct. A newly created louver-punched V-baffle (LPVB) vortex generator was tested experimentally in the current study and the flow and thermal patterns were also investigated using a three-dimensional CFD simulation. The Realizable k–ε turbulence model was utilized in the simulation and the predictions were verified using experimental data and correlations. By directing the impinging air onto the duct's heated surface, the square louver on the baffle served the primary function of reducing pressure drag. Air was used as the test fluid, flowing at Reynolds numbers (Re) from 5300 to 23,000 into the constant heat-fluxed duct. On the heated wall that was set up by letting the V-apex direct upstream, the LPVBs with a 45° attack angle (α) were repeatedly positioned. There were two aspects to the current investigation. First, the optimal relative baffle pitches (PR) and louver angles (β) conditions were determined by looking at the LPVB characteristics, which included four β and three PR at a fixed relative louver size (LR = 0.5) and baffle height (BR = 0.4). Second, three relative louver sizes (LR = 0.3–0.9) were investigated at the optimal PR and β. According to the results, the solid-baffle friction loss is significantly reduced by the LPVB with β > 0° while the heat transfer is slightly lower. In the first part, the LPVB with PR = 1.5, β = 45° has the optimal performance while in the second part, the one with LR = 0.9 yields the greatest performance. A numerical flow model was computed to understand the flow and thermal patterns. The findings were verified using the available measurements, and there is close agreement between the experimental and numerical results.

Heat transfer augmentation in solar heat exchanger duct with louver-punched V-baffles