Grain size

Grain boundary strengthening

Ultimate tensile strength

Grain boundary diffusion coefficient

Composite material

Metallurgy

Materials science

Corrosion

Annealing (glass)

Grain boundary

Grain growth

Microstructure

Journal of Materials Research and Technology

In addition to grain size, the mechanical properties and corrosion resistance of magnesium alloys depend on other factors such as texture, distribution of alloying elements, and homogeneity of the microstructure. These attributes might change during grain refining processes, making the situation more complex and masking the real effect of grain size. Accordingly, in the present work, the grain size of commercially pure (CP) Mg was adjusted by grain growth annealing after casting and deformation by hot rolling (for grain refinement via dynamic recrystallization during thermomechanical processing) to investigate the effect of grain size on tensile properties, hardness, and bio-corrosion resistance in simulated body fluid (SBF) for biomedical implant applications. The grain growth kinetics of commercially pure Mg was studied, where the grain growth activation energy (Q) was found to be consistent with that of the grain boundary diffusion in Mg. Based on the Hall–Petch plots, it was revealed that the yield stress (YS), ultimate tensile strength (UTS), and hardness of pure Mg are highly sensitive to average grain size in comparison to common Mg alloys. Moreover, based on the polarization curves and Nyquist plots obtained from electrochemical impedance spectroscopy (EIS) analysis, grain coarsening led to the enhanced corrosion resistance due to the decreased grain boundary regions, where a simple linear formula was obtained for correlating corrosion current density to average grain size.

Effect of grain size on the mechanical properties and bio-corrosion resistance of pure magnesium