Silicon carbide

Engineering

Materials science

Ceramic

Biochemistry

Chemical engineering

Porosity

Contact angle

Membrane

Composite material

Chemistry

Microfiltration

Wetting

Water Research

Both the pore size and surface properties of silicon carbide (SiC) membranes are demonstrated to significantly affect their separation efficiency when used for oily water treatment. However, the potential influences of open porosity together with the pore size of SiC membranes on their surface properties and oil-water separation performance have rarely been investigated. In this work, porous SiC ceramic membranes with tunable open porosity and pore size were purposely prepared and selected to systematically study the effect of pore structure-dependent wettability on the oil-water separation performance. The measured pure water flux of selected membranes as a function of open porosity (34-48%) and pore size (0.43-0.67 μm) was well-fitted by using a modified H-P equation. Interestingly, the hydrophilicity of SiC membranes was improved with the increase in open porosity and pore size, as evidenced by the gradually decreased dynamic water contact angle and underwater adhesion of oil droplets. Further, the open porosity of SiC membranes was found to contribute more to the improved surface wettability. As a result, the stable flux of SiC membranes in oil-in-water (O/W) emulsions was increased by 24% with the increased open porosity while the oil rejection rate remained above 90%. This work quantitatively reveals the contributions of the pore structure to the surface wettability of ceramic membranes, and thus provides an effective pathway to improve their performance in oil-water separation.

Silicon carbide microfiltration membranes for oil-water separation: Pore structure-dependent wettability matters