Quantum mechanics

Phase (matter)

Engineering

Stress field

Materials science

Cohesive zone model

Softening

Physics

Finite element method

Phase field models

Composite material

Structural engineering

Fracture (geology)

Piezoelectricity

Mechanics

Fracture mechanics

Computer Methods in Applied Mechanics and Engineering

The optimal design, reliable manufacture and durable utilization of electromechanical systems demand objective modeling of failure under coupled electric field and mechanical actions. This is still a challenging and largely an open issue despite the large volumes of contributions from the discontinuous approach and the phase-field community for brittle fracture. In this work we propose a length scale insensitive phase-field cohesive zone model (PF-CZM) for electromechanical fracture in linear piezoelectric solids, overcoming all the issues of mesh dependence, crack tracking complexity, length scale sensitivity and crack nucleation inconsistency. More specifically, in the electromechanically coupled phase-field constitutive relations, the evolution law for the crack phase-field is established from the geometric regularization of sharp cracks and the energetic criterion in global form. In order to capture the unsymmetric mechanical and electrical fracture behavior, the mechanical energy release rate contributed from the positive cone of the effective stress in energy norm is employed as the crack driving force, resulting in a hybrid formulation. With a set of phase-field characteristic functions optimal for cohesive fracture, the critical stress upon crack nucleation and the post-peak softening regime are derived in close-form for the first time, and the experimentally observed effects of the electric field on the fracture load are predicted qualitatively. The proposed electromechanical PF-CZM is numerically implemented in the multi-field finite element method and applied to several representative examples. In all cases, as those for purely mechanical problems, the predicted crack patterns and fracture loads are insensitive to the phase-field length scale and the experimental results are well reproduced. In particular, the effect of electric field on the deflection of crack paths can be captured. These merits make the proposed PF-CZM promising in the modeling of electromechanical fracture in piezoelectric solids.

Phase-field modeling of electromechanical fracture in piezoelectric solids: Analytical results and numerical simulations