two-phase flow

individual phase

Chemical Engineering Journal

• Flow information is acquired non-intrusively by a multimodality measurement system. • Flow models are established to accurately calculate phase flow rates. • Phase fractions are measured by a conductance sensor and an ultrasonic sensor. • Interfacial velocity and oil velocity are extracted from the Doppler shift signal. • The accuracy of the proposed model is validated through dynamic experiments. Water-based dispersed wavy flow, whereby the water with dispersed oil droplets moves along the bottom of the pipe and the gas concurrently on the top, is a frequently encountered horizontal oil-gas-water three-phase flow pattern in petroleum production and transportation. Accurate flow metering of each individual phase is significant to academic research and industrial flow assurance. Therefore, we present a combined electrical and ultrasonic sensor to simultaneously and non-intrusively acquire online flowing information. This information includes: the water fraction estimated by the normalized voltage from a conductance sensor, the gas fraction calculated by locating the gas-liquid interface through a pulse-wave ultrasonic sensor consisting of three transducers, and the coupled velocity of oil droplets and gas-liquid interface from Doppler shift signal acquired by a continuous wave ultrasonic Doppler sensor. Based on the limited flowing information obtained by multimodality sensors, a novel theoretical model is established based on the analysis of the momentum balance between different phases to solve phase fractions and phase actual velocities for calculating phase flow rates. To make the model closed and solvable, the interfacial velocity and oil velocity are respectively extracted by decoupling the Doppler shift signal through amplitude-aware permutation entropy and noise assisted multivariate empirical mode decomposition methods. Finally, the phase flow rates are calculated by the solutions of the established model. Dynamic experiments are performed to verify the effectiveness and accuracy of the proposed method ...

Flow rate measurement of oil-gas-water wavy flow through a combined electrical and ultrasonic sensor