Structural engineering

Goodman relation

Engineering

Composite material

Materials science

Stress concentration

Fatigue testing

Material properties

Fracture mechanics

Paris' law

Crack closure

Journal of Constructional Steel Research

A commonly used material in offshore structures is S355 structural steel. For example, during the monopile fabrication process, the material is pre-strained to different levels at different depths through the thickness. Therefore, the influence of pre-straining on fatigue life and crack growth behaviour of the material needs to be examined and considered for design and life assessment procedures. In the present study, uniaxial fatigue and fatigue crack growth tests have been conducted on materials with different pre-strain levels and the results are compared with the un-strained material state. From the test data, it has been seen that the S-N fatigue life will reduce with increasing pre-straining level, while the fatigue crack propagation rate remains largely unchanged in pre-strained material. The results from this study are compared with the recommended S-N fatigue and fatigue crack growth trends available in standards and are discussed in terms of the applicability and level of conservatism in the recommended curves to account for the material pre-straining effects on the fatigue life assessment of offshore structures.

Material pre-straining effects on fatigue behaviour of S355 structural steel