cavitating flow

cavity pump

cavitation bubble

Engineering applications of computational fluid mechanics

Gaseous and vaporous cavitation have extremely harmful effects on hydraulic axial plunger pumps, reducing flowrate and increasing flow pulsation. The collapse of vapor bubbles strongly impacts the inner wall and produces many pits. Therefore, it is very important to reduce gaseous and vaporous cavitation to improve the performance of hydraulic axial plunger pumps. In this work, a full cavitation model and a compressible model are used to simulate the two kinds of cavitation, which are validated by a series of experiments. It is found that the vapor and gaseous bubbles in the plunger chamber collapse owing to pressurization caused by the water hammer effect. The results show that a better combination of plunger chamber radius and swash plate angle can reduce the two kinds of cavitation when the theoretical flowrate is unchanged; increasing the angle of the inlet of valve plate can effectively reduce its cavitation and increase the filling mass of plunger chambers; increasing the angle of the relief groove can significantly reduce its vapor and gaseous volume fraction. The results can provide a useful reference for reducing gaseous and vaporous cavitation in the optimization and design of hydraulic axial plunger pumps.

Hydraulic axial plunger pump: gaseous and vaporous cavitation characteristics and optimization method