Engineering

Diffuser (optics)

Materials science

Marine engineering

Conical surface

Tube (container)

Francis turbine

Vortex

Mechanical engineering

Physics

Hull

Optics

Flow (mathematics)

Rope

Turbine

Structural engineering

Light source

Mechanics

Draft tube

Renewable Energy

When a Francis turbine operates over an extended range of regimes far from the best efficiency point, the formation of a helical precessing vortex rope can lead to reduced efficiency, severe pressure fluctuations, and power swings. Because the existence of a vortex rope limits the operating range of the Francis turbine, it is necessary to adopt certain measures to mitigate the occurrence of vortex ropes and the associated pressure fluctuations, to improve the operating flexibility of the turbine. In the present study, a novel method to mitigate vortex ropes was proposed. This method involves using a modified draft tube with an inclined conical diffuser. Under the operating condition of a 16° Guide Vane Opening, four different inclination angles (from 0° to 24.4°) were investigated to determine the optimal inclination angle. Computational fluid dynamics results demonstrated that an inclination angle of 18.8° was the most effective for hindering the development of strong swirling flow and resulted in a decline in the pressure pulsation amplitude. This angle was later used under three other partial load operating points, and the results were compared with those of a traditional draft tube. The modified draft tube with an inclined conical diffuser exhibited satisfactory and stable performance in terms of reducing the flow instabilities within the draft tube. Based on an analysis of the mechanism for alleviation of the vortex rope, it was concluded that the inclined conical diffuser plays an effective role in reducing the swirling flow in the draft tube and thus destroying the development of the vortex rope. As a result, the proposed approach could be adopted to ameliorate the instability issue in Francis turbines.

Effect of modified draft tube with inclined conical diffuser on flow instabilities in Francis turbine