Adaptive filter

Physics

Channel (broadcasting)

Noise reduction

Noise floor

Noise (video)

Image (mathematics)

Engineering

Adjacent-channel interference

Electromagnetic interference

Artificial intelligence

Acoustics

Electronic engineering

Interference (communication)

Computer science

Noise measurement

Radar

Telecommunications

Radio spectrum

IEEE Transactions on Vehicular Technology

Interference among frequency modulated continues wave automotive radars can either increase the noise floor, which occurs in the most cases, or generate a ghost target in rare situations. To address the increment of noise floor due to interference, we proposed a low calculation cost method using adaptive noise canceller to increase the signal-to-interference ratio. In a quadrature receiver, the interference in the positive half of frequency spectrum is correlated to that in the negative half of frequency spectrum, whereas the beat frequencies from real targets are always present in the positive frequency. Thus, we estimated the power of the negative frequency as an indication of interference, and fed the positive frequency and negative frequency components into the primary and reference channel of an adaptive noise canceller, respectively. The least mean square algorithm was used to solve for the optimum filter solution. As a result, both the simulation and experiment showed a good interference mitigation performance.

Automotive Radar Interference Mitigation Using Adaptive Noise Canceller