Electrical engineering

Geology

Nanotechnology

Grain size

Deposition (geology)

Engineering

Hydrothermal circulation

Paleontology

Metallurgy

Materials science

Annealing (glass)

Sediment

Photovoltaic system

Antimony

Solar cell

Chemical engineering

Optoelectronics

Nature Energy

Antimony selenosulfide, Sb2(S,Se)3, has attracted attention over the last few years as a light-harvesting material for photovoltaic technology owing to its phase stability, earth abundancy and low toxicity. However, the lack of a suitable material processing approach to obtain Sb2(S,Se)3 films with optimal optoelectronic properties and morphology severely hampers prospects for efficiency improvement. Here we demonstrate a hydrothermal approach to deposit high-quality Sb2(S,Se)3 films. By varying the Se/S ratio and the temperature of the post-deposition annealing, we improve the film morphology, increase the grain size and reduce the number of defects. In particular, we find that increasing the Se/S ratio leads to a favourable orientation of the (Sb4S(e)6)n ribbons (S(e) represents S or Se). By optmizing the hydrothermal deposition parameters and subsequent annealing, we report a Sb2(S,Se)3 cell with a certified 10.0% efficiency. This result highlights the potential of Sb2(S,Se)3 as an emerging photovoltaic material. Antimony chalcogenides are emerging photovoltaic materials, yet difficulties in fabricating high-quality films limit device performance. We show that hydrothermal synthesis affords good morphology and reduced defects in antimony selenosulfide films, enabling solar cells with an efficiency of 10%.

Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10% efficiency