Engineering

Biology

Raw material

Bioenergy

Hydrothermal liquefaction

Nitrogen

Waste management

Extraction (chemistry)

Organic chemistry

Biofuel

Biomass (ecology)

Agronomy

Combustion

Environmental science

Liquefaction

Chemistry

Pulp and paper industry

Chemical Engineering Journal

Hydrothermal liquefaction (HTL) of biomass, especially that of high moisture such as microalgae, macroalgae, sludge, manure, and food waste, for the production of bio-oil has been widely concerned worldwide. However, the contents of nitrogen (N) in these biomasses are commonly high, and 20–40% of the N in the raw biomasses would distribute into bio-oil during the HTL process, resulting in a high content of N in bio-oil, sometimes up to 10 wt%. The combustion of N-rich bio-oil will probably induce massive emission of nitrogen oxides. The transformation behavior of N has not yet been fully understood, and the denitrogenation is a critical issue during bio-oil production and upgrading. This review comprehensively summarized the effects of the type, composition, and pretreatment of biomass and HTL processing parameters, such as temperature, residence time, solid loading, reaction solvent, extraction solvent/procedure, and catalyst, on the N content of bio-oil. The N conversion mechanisms in the HTL process were also clarified. Research gaps were identified, and future research directions were finally proposed to achieve the production of bio-oil with low N content.

Nitrogen in bio-oil produced from hydrothermal liquefaction of biomass: A review