Finance

Crack growth resistance curve

Displacement (psychology)

Digital image correlation

Engineering

Psychology

Composite material

Economics

Materials science

Position (finance)

Stress concentration

Compact tension specimen

Fracture (geology)

Crack tip opening displacement

Psychotherapist

Stress intensity factor

Fracture mechanics

Structural engineering

Crack closure

Engineering Fracture Mechanics

A method to determine crack tip position and fracture process zone (FPZ) in concrete was proposed based on Bažant Crack Band Model (CBM) and digital image correlation (DIC) technique, which was described as: firstly, the critical crack opening displacement of concrete (wcr) was determined based on CBM and the basic mechanical properties; secondly, DIC method was used to obtain the displacement field on the surface of specimens; thirdly, the position where the crack opening displacement equaled to wcr was defined as the crack tip position. In the fatigue crack propagation tests, the whole fatigue crack was FPZ at the beginning of fatigue loading until the non-cohesive crack grew and the length of FPZ decreased. The length of FPZ tended to be stable when the number of loading cycles was close to half of the fatigue life. Fatigue crack propagation curves (a-N curves) were obtained and fitted by logistic function to reduce the influence of the data scattering. Fatigue crack propagation rate da/dN was separated into descending and ascending crack propagation functions based on the increment of crack Δa and stress intensity factor ΔK, respectively. The da/dN-Δa curves for the descending segment showed obvious scatter. Paris’ law was applied to describe fatigue crack propagation rate well for the ascending segment.

Experimental study on fracture and fatigue crack propagation processes in concrete based on DIC technology