Voltage

Engineering

Materials science

Layer (electronics)

Thin-film transistor

Chemical engineering

Transistor

Nanotechnology

Threshold voltage

Optoelectronics

Electrical engineering

Scientific Reports

Metal-oxide thin-film transistors (TFT) fabricated by spray pyrolysis are of increasing interest because of its simple process and scalability. A bottleneck issue is to get a bubble-free and dense material. We studied the effect of ammonium acetate (AA) addition in the oxide precursor solution on the performance of spray-coated ZnO TFTs. AA acts as a stabilizer, which increases the solubility of the solution and enhances the film quality by reducing the defects. With AA addition in ZnO precursor, the films are coffee ring free with high mass density and better grain orientation. The ZnO TFT with AA exhibit a remarkable improvement of its device performance such as saturation mobility increasing from 5.12 to 41.53 cm 2 V −1 s −1 , the subthreshold swing decreasing from 340 to 162 mV/dec and on/off current ratio increasing from ~10 5 to 10 8 . Additionally, the TFTs show excellent stability with a low threshold voltage shift of 0.1 V under gate bias stress. Therefore, the addition of AA is a promising approach to achieve high-performance ZnO TFTs for low-cost manufacturing of displays.

Significant improvement of spray pyrolyzed ZnO thin film by precursor optimization for high mobility thin film transistors