Natural ventilation

Thermal comfort

Engineering

Aerospace engineering

Materials science

Marine engineering

Ventilation (architecture)

Room air distribution

Solar energy

Mechanical engineering

Physics

Solar chimney

Thermal

Chimney (locomotive)

Environmental science

Computational fluid dynamics

Inlet

Architectural engineering

Meteorology

Passive solar building design

Electrical engineering

Building and Environment

This paper reports a numerical investigation of combined solar chimney and water wall for building ventilation and thermal comfort. The effects of major design parameters including glass panel thickness, air gap width and water column thickness are investigated with CFD simulations. The results show that the combined system is capable of providing around-the-clock ventilation with a daily average of 4.1 air changes per hour while maintaining the daily average of the room temperature 4.8°C above that of the ambient. The overall performance of the combined system may be further improved by reducing the glass panel thickness or applying solar control tinting to the water wall assembly, and as much as 7.3% and 5.2% improvements in the ventilation rate and the averaged room temperature respectively can be achieved. Increasing the water column thickness by 0.1 m leads to 4.9% or more improvement in the ventilation rate but will cause the averaged room temperature to drop by 6.4% when the water column thickness is increased to 0.3 m. Increasing the air gap width from 0.1 m to 0.2 m leads to 13.9% improvement in the ventilation rate without affecting the averaged room temperature much. However, further increasing the air gap width only has a minor impact on the ventilation rate.

A numerical investigation of combined solar chimney and water wall for building ventilation and thermal comfort