Catalysis

Engineering

Sewage treatment

Telecommunications

Refinery

Computer science

Environmental engineering

Oil refinery

Organic chemistry

Degradation (telecommunications)

Environmental chemistry

Effluent

Environmental science

Chemistry

Sulfide

Photocatalysis

Advanced oxidation process

Pulp and paper industry

Chemical oxygen demand

Chemical Engineering Journal

Different types of photolytic and photocatalytic advanced oxidation processes (AOPs) were used for treatment of refinery effluents from bitumen production. The treatment efficiency was evaluated by analyzing chemical oxygen demand (COD), biological oxygen demand (BOD5), volatile organic compounds (VOCs) and sulfide ions concentration. The studies revealed a synergistic effect of application of external oxidants (O3, H2O2, O3/H2O2) with TiO2 and UV applied for improved COD and BOD5 reduction as well as the degradation of the VOCs present in the effluents. Among studied processes a photocatalytic process combined with peroxone (TiO2/UV/O3/H2O2) was the optimal and the most economical technology. It allows to reduce 38 and 32% of COD and BOD5 respectively and degrade 84% of total VOCs in 280 min of treatment. At this conditions the reduced COD exceeds over 30% a theoretical value based on the dose of oxidants, which proves the importance of photocatalysis in the developed technology. The sulfide ions were completely depleted in all experiments in the first 30 min of treatment. The addition of TiO2 in the AOPs technology revealed a decrease in the process cost using less amount of chemicals achieving similar treatment efficiency when comparing with photolytic and non-catalytic technologies. The application of these technologies can be conducted in two alternative scenarios; whether to deplete the sulfides ions concentration or to maximize the treatment efficiency. In both options, the technologies studied are promising as a pre-treatment before other types of AOPs effective at neutral/acidic pH values or before a biological treatment stage. Further studies should be developed, by scaling up the process to a pilot scale in a real case scenario to check the possibility of its implementation in the industrial practice.

Synergistic effect of TiO2 photocatalytic advanced oxidation processes in the treatment of refinery effluents