Phase (matter)

Metallurgy

Materials science

Shearing (physics)

Single crystal

Creep

Grain boundary

Volume fraction

Organic chemistry

Alloy

Microstructure

Superalloy

Composite material

Crystallography

Chemistry

Dislocation creep

Diffusion creep

Dislocation

Journal of Alloys and Compounds

Nickel-based single crystal superalloys (Ni-SXs) are of great interests in aircraft industry due to their excellent high temperature creep strength deriving from the rigid gamma/gamma prime (γ/γ′) microstructure and the single crystal nature. The creep properties of Ni-SXs depend strongly on the degradation rate of the original rigid γ/γ′ microstructure with the dislocation movements in the microstructure. Since the applied temperature and stress strongly affect the dislocation movements, the different creep mechanisms are displayed to Ni-SXs during low temperature (∼750 °C), mid-temperature (∼950 °C) and high temperature (∼1100 °C) creep. The creep deformation during low temperature creep is mainly caused by the shearing of γ′ phase by a limited number of dislocations, while high temperature creep mainly occurs to the accumulation of creep strains with the increased dislocation activities in γ phase. To enhance the creep properties of alloy, a variety of strategies of the microstructural optimization need to be considered. One is to increase the volume fraction of γ′ phase to enhance the precipitation strengthening effects. But excessive amounts of γ′ phase are disadvantageous to low temperature strength of alloy. The coarsening of γ′ phase and the rafting process strongly correlates to dislocation movements. It is of importance to discuss the specific mechanisms of coarsening and rafting as well as their influence to the creep properties of alloy. The lattice misfit between the γ and γ′ phase plays an important role in influencing the coarsening of γ′ phase and the creep properties of alloy. A proper lattice misfit helps to form the cubic γ′ phase which is advantageous to alloy. But a too large lattice misfit can promote the coarsening of γ′ phase that damages the structural stability of alloy at high temperatures. The increased additions of refractory elements in alloy promote the formation of topologically close-packed (TCP) phase. TCP phase facilitates the nucleation and propagation of micro-cracks around it that damages the creep properties of alloy. This review aims to summarize some aspects of microstructural evolution during creep of alloy with considering their effects to creep properties. To guide the design of Ni-SXs in future, some perspectives about the microstructural optimization are properly provided.

Microstructural evolution and creep mechanisms in Ni-based single crystal superalloys: A review