Engineering

Geotechnical engineering

Materials science

Ultimate tensile strength

Aggregate (composite)

Three point flexural test

Geology

Oceanography

Environmental science

Fracture toughness

Composite material

Structural engineering

Fracture (geology)

Seawater

Coral

Flexural strength

Fracture mechanics

Ocean Engineering

An analytical approach is proposed to predict the fracture parameters of coral aggregate concrete (CAC). Both the size-independent tensile strength and fracture toughness are related to the maximum fracture load linearly based on the boundary effect model by incorporating the average aggregate size. Moreover, an explicit expression is derived to correlate the maximum fracture load with the local fracture energy at the crack-tip region. The local fracture energy distribution and size-independent fracture energy are then determined by virtue of the maximum fracture load. Four groups of three-point-bending notched CAC beams are tested by considering two ages and two environmental conditions (immersion in seawater or not) and the initial crack length-to-beam depth ratios are set from 0.1 to 0.7 in each group. Results show that the failure modes of all the specimens are coral coarse aggregate fracture without interfacial debonding between the aggregate and surrounding mortar. The average values of tensile strength, fracture toughness and fracture energy can be obtained in each group by using the experimentally measured maximum fracture loads and the experimental scatters were analyzed based on normal distribution analysis. All the fracture parameters increase with the age and become larger if the specimens were immersed in seawater.

An analytical approach to predict fracture parameters of coral aggregate concrete immersed in seawater