Quantum mechanics

Voltage

Engineering

Materials science

Energy (signal processing)

Power (physics)

Energy harvesting

Acoustics

Load resistance

Mechanical engineering

Physics

Amplitude

Pipeline (software)

Electromagnetic coil

Mechanics

Electrical load

Magnet

Electrical engineering

The Scientific World JOURNAL

This paper presents the analytical modeling and simulation of an electromagnetic energy harvester (having linear behaviour) that generates power from pulsating fluid flow for pipeline condition monitoring systems. The modeled energy harvester is comprised of a cylindrical permanent magnet and a wound coil attached to a flexible membrane which oscillates due to the pulsating fluid flow in the pipe over which the prototype is considered to be mounted. In the harvester electrical energy is produced due to the relative motion between the coil and magnet. Based on the harvester’s architecture a lumped parameter model (single degree of freedom system) is developed and is simulated at different physical operational conditions. The simulation is performed at pressure amplitude of 625 Pa. When subjected to the operational frequency sweep, at the harvester’s resonant frequency (500 Hz) and damping ratio of 0.01, the devised model predicted the maximum open circuit voltage of 2.55 V and load voltage of 1.27 V. While operating under resonance, the maximum load voltage of 2.45 V is estimated at load resistance of 100 Ω. However, at an optimum load of 4.3 Ω, the simulation shows a production of 188151.2 μ W power at a frequency of 500 Hz.

Analytical Modeling and Simulation of an Electromagnetic Energy Harvester for Pulsating Fluid Flow in Pipeline