Gas compressor

Engineering

Aerospace engineering

SPARK (programming language)

Materials science

Turbocharger

Computer science

Compression ratio

Internal combustion engine

Mechanical engineering

Homogeneous charge compression ignition

Combustion chamber

Nuclear engineering

Organic chemistry

Ignition timing

Combustion

Automotive engineering

Composite material

Laser ignition

Compression (physics)

Chemistry

Programming language

Ignition system

Engine knocking

Applied Energy

The pre-chamber ignition concept is an attractive strategy to enable the operation of spark-ignition engines in lean or diluted conditions keeping a suitable combustion process. According to the results the benefits in lean conditions include the combustion process shortening, the improvement of combustion stability and the increase of combustion efficiency by lowering carbon monoxide and hydrocarbons emissions. Thus, the pre-chamber ignition concept, especially in its passive version, arises as a promising alternative for future spark-ignition engines for passenger car applications. In this framework, an experimental investigation has been carried out to evaluate the potential of passive pre-chamber ignition concept in a high compression ratio, turbocharged, port fueled spark-ignition engine, using 95 Research Octane Number gasoline. As a first step, a 1D Wave Action Model was generated to design the pre-chamber geometry taking the fuel available at the start of pre-chamber combustion and the pressure difference between the main chamber and pre-chamber as key parameters. In a second step, these pre-chamber designs were experimentally validated at high load/speed conditions (4500 rpm, 12.5 bar Indicated Mean Effective Pressure) and compared with the conventional spark-ignition concept. Experimental results show how the passive pre-chamber concept increases efficiency with good combustion stability and high combustion efficiency in stoichiometric conditions. Nevertheless, maximum lambda attainable with the passive system is similar than that of the conventional spark and much lower compared to the maximum levels reported for the active system.

Evaluation of the passive pre-chamber ignition concept for future high compression ratio turbocharged spark-ignition engines