Response analysis

Gas compressor

Beam (structure)

Rotor (electric)

Blade element theory

Process (computing)

Engineering

Crack closure

Blade (archaeology)

Aerodynamic force

Materials science

Aerodynamics

Operating system

Vibration

Computer science

Acoustics

Mechanical engineering

Physics

Rotordynamics

Crack tip opening displacement

Structural engineering

Mechanics

Fracture mechanics

Mechanical Systems and Signal Processing

There exists a lot of research on the breathing-crack induced nonlinear vibration for beam-like structures. To the best of our knowledge, these studies mainly focus on the non-rotating uniform beam. Little research on the cracked compressor blade with varying-section and twisted shape has been performed considering the rotational effects (i.e., Coriolis force, stress stiffening, spin softening and angular acceleration) and comparatively accurate crack propagation paths (i.e., semi-elliptical crack). In this paper, typical fatigue cracks analyzed in referenced crack propagation path simulation and experimental tests are introduced into the ANSYS finite element (FE) model of a rotating compressor blade, which accounts for the influence of rotational effects. Then the effects of angular acceleration, amplitude of aerodynamic force and crack parameters (i.e., crack position, crack depth and crack height) on the dynamic characteristics of a cracked compressor blade during run-up process (RUP) are discussed. The results show that the crack-induced second- and third-order super-harmonics can be observed and become more evident with increasing crack severity (i.e. crack position closer to blade root surface or a larger crack depth/height) during RUP. Moreover, aerodynamic force plays a dominant role in affecting crack-breathing behavior at low speeds, while centrifugal force dominates the crack-breathing behavior at high speeds.

Vibration response analysis of a cracked rotating compressor blade during run-up process