Electrical engineering

Logic gate

Transistor

Inverter

Electronic circuit

NAND gate

Engineering

Voltage

Digital control

Gate driver

Gate oxide

Electronic engineering

Converters

Gate equivalent

IEEE Transactions on Industry Applications

The requirements for peripheral circuits of power converters are becoming more restrictive due to the enhancement of Si-based power devices and due to practical use of SiC device. In the design of modern high-speed switching converters, the stray inductances and capacitances both in the device package and in the gate drive circuit in addition to those in the main circuit of the power converter must be considered. In these situations, the gate driving technique represents the key technology for enhancement of high-speed switching ability of power devices, as there are design limitations to reduce the stray inductances and capacitances. So far, several active gate control methods have been proposed. Most conventional active gate drivers are configured using analog circuits such as transistors and diodes. Thus, it is difficult to reconfigure their control parameters to fit the stray inductances and capacitances after the implementation of power converter and gate circuits. As a solution to these problems, the authors have proposed a programmable gate driver IC, which is a digitally controlled circuit. This gate driver IC can control the gate current at 63 separate levels, operated by programmable fully digital 12-bit and clock signals. In this paper, an active gate current control based on the load current in a half-bridge inverter with two programmable gate driver ICs is demonstrated. This developed gate control is different to the general current feedback control followed the reference value. It is verified that the proposed active gate control can effectively improve the tradeoff relationship between the surge voltage and switching loss of the pulsewidth modulation half-bridge inverter circuit.

Active Gate Control in Half-Bridge Inverters Using Programmable Gate Driver ICs to Improve Both Surge Voltage and Converter Efficiency