Smart antenna

Bandwidth (computing)

Materials science

Literature

Telecommunications

Computer science

Antenna (radio)

Reconfigurable antenna

Directional antenna

Physical chemistry

Polarization (electrochemistry)

Coaxial antenna

Physics

Microstrip

Optics

Patch antenna

Microstrip antenna

Chemistry

Dual (grammatical number)

Dipole antenna

Optoelectronics

IEEE Transactions on Antennas and Propagation

A two-port pattern reconfigurable three-layered Yagi-Uda patch antenna with ±45° dual-polarization characteristic is presented. A driven patch (DP) and two large parasitic patches (LPPs) are printed on the top side of the middle layer, and the middle and bottom layers share a common metal ground. Two microstrip feedlines printed orthogonally on the bottom side of the bottom layer are used to feed the DP through two H-shaped slots etched in the ground. The LPPs are connected to/disconnected from the ground controlled by switches. By adjusting the connection states of the LPPs, one wide-beam mode and three narrow-beam modes can be obtained in both polarizations. A small parasitic patch is printed on the top side of the top layer to improve the pattern coherence of the two polarizations. This antenna is studied by both simulation and measurement. The measured common bandwidth of the four modes in both polarizations is 3.32-3.51 GHz, and the isolations between two polarizations in all the modes are higher than 20 dB. The low-profile antenna is very suitable for microbase-station applications.

A Dual-Polarized Pattern Reconfigurable Yagi Patch Antenna for Microbase Stations