Stiffness Enhancement in Nacre-Inspired Nanocomposites due to Nanoconfinement.

Published on Nov 20, 2015in Scientific Reports3.998
· DOI :10.1038/SREP16452
Chen Shao6
Estimated H-index: 6
(NU: Northwestern University),
Sinan Keten34
Estimated H-index: 34
(NU: Northwestern University)
Sources
Abstract
Layered assemblies of polymers and graphene derivatives employ nacre’s tested strategy of intercalating soft organic layers with hard crystalline domains. These layered systems commonly display elastic properties that exceed simple mixture rule predictions, but the molecular origins of this phenomenon are not well understood. Here we address this issue by quantifying the elastic behavior of nanoconfined polymer layers on a model layered graphene-polymer nanocomposite. Using a novel, validated coarse-grained molecular dynamics simulation approach, here we clearly show that the elastic properties of layered nanocomposites cannot be described by volume fraction considerations alone and depend strongly on both interfacial energy and nanostructure. We quantify the relative importance of polymer nanoconfinement and interfacial energy on polymer structure and elasticity, and illustrate the validity of our model for two polymers with different intrinsic elastic properties. Our theoretical model culminates in phase diagrams that accurately predict the elastic response of nacre-inspired nanocomposites by accounting for all material design parameters. Our findings provide widely applicable prescriptive guidelines for utilizing nanoconfinement to improve the mechanical properties of layer-by-layer nanocomposites. Our findings also serve to explain why the elastic properties of organic layers in nacre exhibit multifold differences from the native and extracted states.
📖 Papers frequently viewed together
26k Citations
20158.82Carbon
4 Authors (Luis Ruiz, ..., Sinan Keten)
104 Citations
200841.84Science
4 Authors (Changgu Lee, ..., James Hone)
14.5k Citations
References59
Newest
#1Luis Ruiz (NU: Northwestern University)H-Index: 9
#2Wenjie Xia (NU: Northwestern University)H-Index: 20
Last. Sinan Keten (NU: Northwestern University)H-Index: 34
view all 4 authors...
Abstract Graphene is the strongest and highest weight-to-surface ratio material known, rendering it an excellent building block for nanocomposites. Multi-layer graphene (MLG) assemblies have intriguing mechanical properties distinct from the monolayer that remain poorly understood due to spatiotemporal limitations of experimental observations and atomistic modeling. To address this issue, here we establish a coarse-grained molecular dynamics (CG-MD) model of graphene using a strain energy conser...
104 CitationsSource
#1Wenjie Xia (NU: Northwestern University)H-Index: 20
#2Sinan Keten (NU: Northwestern University)H-Index: 34
Abstract : Mechanical properties of nanoscale free-standing polymer thin films exhibit size-dependence due to surface effects. However, it has remained a challenge to associate the length scales where such differences emerge with bulk polymer properties. Here we utilize molecular dynamics simulations to uncover the dependence of elastic modulus of freestanding films on film thickness and bulk properties. Comparison of glass transition temperature (Tg) and modulus (E) indicates that Tg converges ...
20 CitationsSource
#1Wenjie Xia (NU: Northwestern University)H-Index: 20
#2David D. Hsu (NU: Northwestern University)H-Index: 10
Last. Sinan Keten (NU: Northwestern University)H-Index: 34
view all 3 authors...
Substrate–film interfacial properties play a fundamental role in the adhesion of glassy polymer thin films onto supporting substrates. Utilizing steered molecular dynamics (SMD) simulations, here we uncover that the cohesive noncovalent forces between polymer chains also have a significant effect on the adhesive properties of polymer films in contact with flat substrates. We demonstrate that weaker interchain interactions, all else being the same, can induce higher adhesion energy within the int...
39 CitationsSource
#1Paul Z. Hanakata (Wesleyan University)H-Index: 10
#2Jack F. Douglas (NIST: National Institute of Standards and Technology)H-Index: 91
Last. Francis W. Starr (Wesleyan University)H-Index: 54
view all 3 authors...
Interfacial mobility in thin polymer films is crucial for their technological applications. Here, Hanakata et al. provide computational evidence for a general relationship between the scale of interfacial mobility and collective motion within the films, which explains their glass transition behaviour.
176 CitationsSource
#1David D. Hsu (NU: Northwestern University)H-Index: 10
#2Wenjie Xia (NU: Northwestern University)H-Index: 20
Last. Sinan Keten (NU: Northwestern University)H-Index: 34
view all 4 authors...
We present a versatile systematic two-bead-per-monomer coarse-grain modeling strategy for simulating the thermomechanical behavior of methacrylate polymers at length and time scales far exceeding atomistic simulations. We establish generic bonded interaction parameters via Boltzmann inversion of probability distributions obtained from the common coarse-grain bead center locations of five different methacrylate polymers. Distinguishing features of each monomer side-chain group are captured using ...
77 CitationsSource
#1Allison M. Beese (NU: Northwestern University)H-Index: 26
#2Zhi An (NU: Northwestern University)H-Index: 13
Last. SonBinh T. Nguyen (NU: Northwestern University)H-Index: 94
view all 6 authors...
A biologically inspired, multilayer laminate structural design is deployed into nanocomposite films of graphene oxide-poly(methyl methacrylate) (GO-PMMA). The resulting multilayer GO-PMMA films show greatly enhanced mechanical properties compared to pure-graphene-oxide films, with up to 100% increases in stiffness and strength when optimized. Notably, a new morphology is observed at fracture surfaces: whereas pure-graphene-oxide films show clean fracture surfaces consistent with crack initiation...
26 CitationsSource
#1Wenjie Xia (NU: Northwestern University)H-Index: 20
#2Shawn Mishra (NU: Northwestern University)H-Index: 8
Last. Sinan Keten (NU: Northwestern University)H-Index: 34
view all 3 authors...
Abstract The glass-transition temperature ( T g ) of polymer thin films can be strongly influenced by the combined effects of the supporting solid substrate and the free surface. The relative importance of these two effects, which often compete with each other, depends on the strength of the substrate–film interactions. Utilizing an atomistically informed coarse-grained model for poly(methyl methacrylate) (PMMA), here we uncover the relationship between the substrate–film interfacial energy and ...
72 CitationsSource
#1Wenjie Xia (NU: Northwestern University)H-Index: 20
#2Sinan Keten (NU: Northwestern University)H-Index: 34
Intermolecular noncovalent forces between polymer chains influence the mobility and glass-transition temperature (Tg), where weaker interchain interactions, all else being the same, typically results in lower bulk polymer Tg. Using molecular dynamics simulations, here we show that this relation can become invalid for supported ultrathin films when the substrate–polymer interaction is extremely strong and the polymer–polymer interactions are much weaker. This contrasting trend is found to be due ...
32 CitationsSource
#1Ahmad Khayer Dastjerdi (McGill University)H-Index: 7
#2Reza Rabiei (McGill University)H-Index: 9
Last. Francois Barthelat (McGill University)H-Index: 36
view all 3 authors...
Abstract Mineralization is a typical strategy used in natural materials to achieve high stiffness and hardness for structural functions such as skeletal support, protection or predation. High mineral content generally leads to brittleness, yet natural materials such as bone, mollusk shells or glass sponge achieve relatively high toughness considering the weakness of their constituents through intricate microstructures. In particular, nanometers thick organic interfaces organized in micro-archite...
62 CitationsSource
Coarse-grained molecular dynamics simulations have been performed to study a nanometric polyamide-6,6 film containing long chains (100 chemical repeat units), in contact with a graphene surface and with vacuum, in a huge simulation box (the distance between the interfaces ≈ 36 nm) for a long time (70 ns). Compared with atomistic simulations, with limitations in chain length, box size, and simulation time, restricting them to the study of local structural and short-time dynamic properties, this s...
60 CitationsSource
Cited By26
Newest
#1Cho-Chun Chiang (Clemson University)
#2Jane Breslin (Clemson University)
Last. Zhaoxu Meng (Clemson University)H-Index: 13
view all 4 authors...
Abstract null null Nacre, a natural nanocomposite with a brick-and-mortar structure existing in the inner layer of mollusk shells, has been shown to optimize strength and toughness along the laminae (in-plane) direction. However, such natural materials more often experience impact load in the direction perpendicular to the layers (i.e., out-of-plane direction) from a sea of predators. The dynamic responses and deformation mechanisms of layered structures under impact load in the out-of-plane dir...
Source
Abstract null null Flexible electrodes with good conductivity and stability during deformation are the key medical devices for thermal therapy. However, reconciling the contradiction between conductive stability and stretchability is still a challenging issue. In this study, biaxial stress field was generated by rotation extrusion technology and we successfully realized the concentric arrangement of 2D conductive graphene (GR) in the flexible tubular electrode. It is worth mentioning that this 2...
Source
#1Qingping Sun (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 8
#2Guowei Zhou (OSU: Ohio State University)H-Index: 11
Last. Xuming Su (Ford Motor Company)H-Index: 18
view all 5 authors...
Abstract A bottom-up multi-scale modeling approach is used to develop an Integrated Computational Materials Engineering (ICME) framework for carbon fiber reinforced polymer (CFRP) composites, which has the potential to reduce development to deployment lead time for structural applications in lightweight vehicles. In this work, we develop and integrate computational models comprising of four size scales to fully describe and characterize three types of CFRP composites. In detail, the properties o...
6 CitationsSource
: Nanoconfinement is one of the most intriguing nanoscale effects and affects several physical and chemical properties of molecules and materials, including viscosity, reaction kinetics, and glass transition temperature. In this work, liquid nuclear magnetic resonance (NMR) was used to analyze the behavior of 2,4-pentadienone in ordered mesoporous materials with a pore diameter of between 3 and 10 nm. The liquid NMR results showed meaningful changes in the hydrogen chemical shift and the keto-en...
Source
#1Tianjiao Li (NU: Northwestern University)
Abstract Graphene oxide (GO) is a promising building block for nanocomposites due to its excellent mechanical properties and tunable interfacial interactions with polymers. While experiments have shown that GO sheets consist of graphitic regions clustering into patches and oxidized regions constituting the remaining areas, the role that these heterogeneous patches play on interfacial and mechanical properties of GO reinforced nanocomposites have not yet been investigated. To address this issue a...
9 CitationsSource
#1Sijie Wan (Beihang University)H-Index: 15
#2Ying Chen (PKU: Peking University)H-Index: 84
Last. Qunfeng Cheng (Beihang University)H-Index: 37
view all 12 authors...
Summary Converting natural graphite to high-performance graphene films is very attractive due to graphite's abundance. However, this conversion is challenging to do inexpensively and under ambient conditions. One of the major challenges is how to design the interface between adjacent graphene nanosheets to integrate high strength, high toughness, and high conductivity into graphene films. Here, we demonstrate that a long-chain π-π bonding agent can bridge reduced graphene oxide nanosheets into u...
46 CitationsSource
#1Can Wang (Stanford University)H-Index: 2
#2Scott G. Isaacson (Stanford University)H-Index: 4
Last. Reinhold H. Dauskardt (Stanford University)H-Index: 68
view all 10 authors...
4 CitationsSource
#1Seunghwa Ryu (KAIST)H-Index: 25
#2Sangryun Lee (KAIST)H-Index: 7
Last. Young-Soo Kim (KAIST)H-Index: 31
view all 5 authors...
Micromechanics-based homogenization has been employed extensively to predict the effective properties of technologically important composites. In this review article, we address its application to various physical phenomena, including elasticity, thermal and electrical conduction, electric and magnetic polarization, as well as multi-physics phenomena governed by coupled equations such as piezoelectricity and thermoelectricity. Especially, for this special issue, we introduce several research wor...
7 CitationsSource
#1Akarsh Verma (IITR: Indian Institute of Technology Roorkee)H-Index: 15
#2Avinash Parashar (IITR: Indian Institute of Technology Roorkee)H-Index: 18
Last. Muthukumaran Packirisamy (Concordia University)H-Index: 22
view all 3 authors...
Due to their exceptional properties, graphene and hexagonal boron nitride (h-BN) nanofillers are emerging as potential candidates for reinforcing the polymer-based nanocomposites. Graphene and h-BN have comparable mechanical and thermal properties, whereas due to high band gap in h-BN (~5 eV), have contrasting electrical conductivities. Atomistic modeling techniques are viable alternatives to the costly and time-consuming experimental techniques, and are accurate enough to predict the mechanical...
42 CitationsSource
#1Hariprasad Gopalan (IISc: Indian Institute of Science)H-Index: 2
#2Atul H. Chokshi (IISc: Indian Institute of Science)H-Index: 37
Abstract Nacre achieves excellent mechanical properties with a relatively simple hierarchical structure. Analyses suggest that a significant gain in toughness is realized with a modest reduction in strength, with increasing levels of hierarchy. This study probes the role of different hierarchical length scales in governing the strength and modulus of nacre using a combination of bulk compression tests, microindentation and nanoindentation tests. The variability in the measured properties is asse...
13 CitationsSource