Heat transfer coefficient

Heat transfer

Materials science

Coating

Layer (electronics)

Thermodynamics

Physics

Glazing

Optics

Thermal

Absorptance

Composite material

Laminated glass

Reflectivity

Journal of Physics D Applied Physics

A transient one-dimensional mathematical model allowing the prediction of the thermal performance of laminated glazing with and without chemically deposited solar control coating and its experimental verification are presented. A normal laminated glass is composed of two 3 mm glass sheets with a thin polymer layer between them. For the experimental verification, the coating used was a thin film of added between the polymer layer and one of the glass sheets. A constant normal incidence of air mass 2 solar radiation was assumed. Conductive heat transfer within the glass sheets and convective and radiative heat transfer through the inside and outside are considered. Using the optical properties of glass, polymer and solar control coating, the redistribution of the absorbed component of the solar radiation and the shading coefficient (SC) are calculated as functions of the convective heat-transfer coefficient for the outside . Variations of the theoretical inside glass temperature for and SC for the solar absorptance of the film varying from 0 to 0.9 are presented. For the array with the highest solar absorptance of the solar control coating , the decrease in was from 49 down to C, a temperature drop of C as increases from 5 to . The SC for the array with is almost constant with and close to unity, whereas for the array with , the SC drops by 62% from 0.58 to 0.22 as increases.

The thermal response of laminated glass with solar control coating