International Journal of Adhesion and Adhesives
Papers 3466
1 page of 347 pages (3,466 results)
#1Deepak Kumar (IITG: Indian Institute of Technology Guwahati)H-Index: 5
#2Sachin D. Kore (IITs: Indian Institutes of Technology)H-Index: 11
Last. Arup Nandy (IITG: Indian Institute of Technology Guwahati)H-Index: 5
view all 3 authors...
Abstract Electromagnetically assisted adhesive joining (EAAJ) is a novel hybrid joining technique combining the benefits of electromagnetic crimping and adhesive joining. This paper explores the possibility of creating an interference-fit tubular adhesive joint with improved strength and leak tightness. An acrylic-based structural Loctite 638 adhesive is used. Experiments are performed with and without (electromagnetic crimping) adhesives. Pull-out and compression test is performed for both join...
#1Lakshmana Rao Bhagavathi (Rajiv Gandhi University of Knowledge Technologies)H-Index: 1
#2Abhijit P. Deshpande (Indian Institute of Technology Madras)H-Index: 15
Last. Sushanta Kumar PanigrahiH-Index: 27
view all 4 authors...
Abstract In this work, microcrystalline cellulose (MCC) and sawdust (SD) green fillers have been demonstrated as reactive fillers and moisture reservoirs for enhanced curing and adhesion strength of one-component moisture curable polyurethane (PU) adhesives. The chemical reaction between the MCC or SD fillers and isocyanates present in the PU adhesives was tracked using Fourier-transform infrared spectroscopy (FTIR), while the joint strength was determined using lap-shear tests. The results show...
#1Vincenzo Fiore (University of Palermo)H-Index: 26
#2F. Di Franco (University of Palermo)H-Index: 14
Last. Antonino Valenza (University of Palermo)H-Index: 34
view all 6 authors...
Abstract In this study, the anodizing process based on the use of tartaric sulfuric acid solution (TSA) was carried out on metal substrate to evaluate for the first time its effect on the adhesion strength and corrosion resistance of aluminium alloy (i.e., AA5083) to fibre (i.e., basalt or glass) reinforced composite adhesive joints for nautical applications. Furthermore, some TSA anodized samples were soaked in a NaOH solution to investigate the influence of this post-immersion step on the join...
#1Helder Callegaro Velho (UFSM: Universidade Federal de Santa Maria)H-Index: 2
#2Gabriel Kalil Rocha Pereira (UFSM: Universidade Federal de Santa Maria)H-Index: 19
Last. Vinícius Felipe Wandscher (Franciscan University of Steubenville)H-Index: 12
view all 7 authors...
Abstract The present study analyzed the fatigue performance of prefabricated fiber reinforced composite posts (FRC post) with different diameters by means of two different fatigue testing methods. A total of 69 FRC double-tapered posts, presenting 20mm in length associated with different coronal diameters (1.4, 1.6, 2.0 mm) were embedded with acrylic resin in PVC cylinders, maintaining 6 mm free from the coronal part of the post. The posts of each diameter were submitted to step stress testing (...
Last. Amine Moubarik (Applied Materials)H-Index: 2
view all 5 authors...
Abstract This work attempts to develop an environmentally friendly wood adhesive by formulating cornstarch - mimosa tannin (CSMT) with sodium alginate (SA). During this work, SA was extracted from brown seaweeds Laminaria digitata, the obtained sample was characterized using different analysis techniques such as FT-IR, 1H NMR, specific viscosity and TGA/DTA. This study serves to investigate the effect of different ratios of CMST/SA (w/w) on mechanical and physical performance properties such as ...
#1M. Moreira Arouche (TU Delft: Delft University of Technology)H-Index: 1
#2Mohamed Nasr Saleh (TU Delft: Delft University of Technology)H-Index: 9
Last. S. de Barros (CEFET-MG: Centro Federal de Educação Tecnológica de Minas Gerais)H-Index: 10
view all 4 authors...
Abstract This work investigates the effect of long-term environmental exposure on the performance of composite-to-metal bonded joints. Specimens are manufactured using a carbon-fiber reinforced polymer (CFRP) co-bonded to a steel member with epoxy adhesive and aged in a salt spray chamber. The mixed-mode fracture behavior of the non-aged and aged specimens is assessed using the mixed-mode bending (MMB) test apparatus. The fracture energy is calculated using the finite elements method and an anal...
#1Jun Li (Henan University of Technology)H-Index: 10
#2Sarocha Pradyawong (KSU: Kansas State University)H-Index: 4
Last. Huai N. Cheng (ARS: Agricultural Research Service)H-Index: 33
view all 7 authors...
Abstract Cottonseed protein has great potential to replace formaldehyde-based adhesives due to the nature of non-toxicity, harmlessness, and non-pollution. Like soy protein-based adhesives, cottonseed protein-based adhesives also face a huge challenge in water resistance. In this work, the adhesion performance of cottonseed protein isolate (CSPI) modified by combination of H3PO4 and CaCl2 with different mole ratios was investigated and compared with those modified by 40 mM H3PO4, CaCO3, CaO, or ...
#1Yuqiong Yang (NU: Nanjing University)
#2Yashuang Ding (NU: Nanjing University)
Last. Xiangfeng Meng (NU: Nanjing University)H-Index: 4
view all 6 authors...
Abstract Objective The objective was to apply the silver nanoparticles (AgNPs) in situ synthesized in an adhesive resin. Materials and Methods Silver 2-ethylhexanoate was added into Clearfil SE Bond (Kuraray Inc.) to form 0.0% Ag, 0.1% Ag, 0.2% Ag groups. The size and distribution of AgNPs formed in light-cured adhesive resin disks were observed by TEM. The degree of conversion was evaluated by FTIR. The cytotoxicity against human periodontal ligament fibroblasts was examined by CCK-8 assay. Aft...
#1Hong Guangqi (BIT: Beijing Institute of Technology)H-Index: 1
#2Na Li (BIT: Beijing Institute of Technology)H-Index: 9
Last. Daining Fang (PKU: Peking University)H-Index: 66
view all 6 authors...
Abstract Debonding often occurs in flexible batteries due to mechanical and electrochemical coupling during service. Debonding of electrode will seriously affect the capacity and life of the battery, and even cause a short circuit inside the battery, resulting in spontaneous combustion. Here, the adhesion performance between the electrode sheet and the active material are investigated under the electrolyte environment and different states of charge (SOCs). A small stretcher loading device is use...
#1Xiangwei Zhu (HBUT: Hubei University of Technology)
#2Changyuan Song (Zhengzhou University)
Last. Xi Chen (Wuhan Polytechnic University)
view all 8 authors...
Abstract The poor water resistance of protein adhesives seriously restricted their practical applications. Though many crosslinking agents, i.e. phenol formaldehyde, epoxy resins etc., can enhance the wet adhesion, high-proportion use of synthetic additives reduce intrinsic sustainability of protein formulations, and thus green yet robust protein adhesives are still highly expected. Herein, tannic acid (TA), a woody bio-extract abundant in catecholic hydroxyls, was used to improve the wet adhesi...
Top fields of study
Composite material
Materials science
Structural engineering