Materials Today: Proceedings
Papers
15.3k
Papers 10,000
1 page of 1,000 pages (10k results)
Newest
#1Shaheer Ahmed Khan (IIUM: International Islamic University Malaysia)H-Index: 1
#2Zakaria Mohd Zain (IIUM: International Islamic University Malaysia)H-Index: 5
Last. Mohammad Salman Rais (IIUM: International Islamic University Malaysia)H-Index: 1
view all 7 authors...
Organic solar cells are gaining popularity in the field of photovoltaics due to their solution processability, flexibility, low temperature fabrication, ease of integration, and environmental friendliness. Despite these characteristics, its energy conversion efficiency is still lower than other solar cells. It is therefore inevita- ble that the focus will be on improving the efficiency of organic solar cells. With this in mind, we have tried to improve its efficiency by developing and integratin...
Source
#1Prince Awuku Ayisi (Gazeta Tema)
#2Tiyamike Ngonda (Cape Peninsula University of Technology)H-Index: 2
Last. Kant Kanyarusoke (Busitema University)
view all 3 authors...
Abstract null null If appropriate landfill utilisation technologies were implemented, landfills on the African continent could be a source of energy for domestic and commercial use instead of their current status as environmental and health hazards. The present study reviewed 59 research publications authored from 2004 to 2021 on existing landfills technologies. These technologies are currently implemented in some African countries and are considered viable for developing landfill-based biogas g...
Source
#1R. Raja (Karunya University)H-Index: 3
#2Jebas D Gabriel (Anna University)
Last. Titus ThankachanH-Index: 15
view all 7 authors...
Abstract null null This work on the designing and analysis of micro lattice structures in various configurations. Initially, four different Body-Centered Cubic (BCC) lattice cell structures (LCS) of different strut diameters were designed using SolidWorks. ANSYS Workbench has been used to determine the lattice structure's compression stress analysis and the evaluation of deformation and stress analysis. To estimate the equivalent solid properties: First, the FEA method and theoretical calculatio...
Source
#1Ahmad Alothman (SRM University)
#2S. Sree Nandini (SRM University)
Last. L. Krishnaraj (SRM University)
view all 3 authors...
Abstract null null PCM (Phase changing materials) have more implemented in construction and building interiors for improving temperature controls, minimize the heat and cooling load. The phenomenal change from a substantial phase to a dissolvable phase and vice versa is used to store and release the heat. From this perspective, this article focuses on the alternative solutions to light upon the energy demand and to minimize the unfavorable ambient effect by using PCM with building components lik...
Source
#1Bheemappa Suresha (National Institute of Engineering)H-Index: 25
#2P.M. Rasalingaswamy (National Institute of Engineering)
Last. S. M. Darshan (National Institute of Engineering)H-Index: 1
view all 4 authors...
Abstract null null The boosting of electrical and microelectronic goods causes the continuous increase in the amount of power per unit volume of these gadgets, leading to unavoidable overheating problems that diminish their functional performance as well as life span. One of the primary aims of materials science is the creation of high-performance materials that are made from renewable resources. Multi-phase composites were recognised as an effective route to achieve a new portfolio of advanced ...
Source
Abstract null null The prime objective of this paper is to “To analyze the insurers’ benefits and challenges in digital insurance and to analyze the factors of digital transformation of insurance adoption by the insurers”. Apart from insurance, people across the globe are detecting the scent of digitization in every little location. In the insurance industry, digitization has both advantages and disadvantages. In this article, we'll attempt to figure out how satisfied consumers are with digitiza...
Source
#1Kedar Uttarwar (MIT: Massachusetts Institute of Technology)
#2Puskaraj D. Sonawwanay (MIT: Massachusetts Institute of Technology)H-Index: 1
view all 3 authors...
Abstract null null High Pressure Grinding Rolls - HPGR is a relatively new technology first implemented in Europe into Cement Industry and later incorporated into Mineral industry in the late 20th century as replacement to conventional mills like rod and ball mills due to the higher efficiencies offered by them in comminuting the material fed to the mill. These are heavy duty machines designed to operate for 60–100 thousand hours, hence making millions of revolutions in their lifetime at the ope...
Source
#1M.K. Shilpa (GITAM: Gandhi Institute of Technology and Management)
#2Vamsidhar Yendapalli (GITAM: Gandhi Institute of Technology and Management)H-Index: 1
Abstract null null Drilling is the process of removing the material and is a pre-processing step for various operations like reaming, boring, and tapping. The surface of the drilled hole has an impact on the performance of the component product. Surface roughness also determines the life cycle of the manufactured product. There are two ways for measuring surface roughness: Contact and non-contact methods. The contact approach employs stylus devices that must come into direct touch with the surfa...
Source
#1Jongjan Mahadlek (SU.: Silpakorn University)H-Index: 9
#2Sai Myo ThureinH-Index: 2
Last. Thawatchai Phaechamud (SU.: Silpakorn University)H-Index: 17
view all 4 authors...
Abstract null null The lower viscosity character of fatty acid solution has been interested as in situ forming film (ISF) oral spray owing to its ease of spraying. Thus, the present experiment prepared ISF oral spray formula comprising different proportions of lauric acid (L) and palmitic acid (P) and their pH, density, viscosity, contact angle, surface tension and spray angle were determined. The higher L amount decreased density, pH, contact angle and spray angle as well as increased the gelat...
Source
#1M. Noryani (UTeM: Universiti Teknikal Malaysia Melaka)
#2H. J. Aida (UTeM: Universiti Teknikal Malaysia Melaka)H-Index: 1
Last. M.A. Shaharuzaman (UTeM: Universiti Teknikal Malaysia Melaka)
view all 5 authors...
Abstract null null Identifying the correlation between the physical and mechanical properties of the natural plant is important in material characterization by performing the statistical approach. The variation of a type of plant fibre would exhibit a wide range of material properties. The prediction of materials characterization is optimized when the significant elements is identified earlier. Pearson correlation coefficient is calculated from the measurements of physical and mechanical propert...
Source
12345678910
Top fields of study
This website uses cookies.
We use cookies to improve your online experience. By continuing to use our website we assume you agree to the placement of these cookies.
To learn more, you can find in our Privacy Policy.