Nuclear engineering

Physics

Organic chemistry

Membrane

Tritium

Diffusion

Engineering

Radiochemistry

Composite material

Nuclear physics

Chemistry

Materials science

Fusion power

Blanket

Helium

Plasma

Environmental science

Permeation

Biochemistry

Breeder (animal)

Thermodynamics

Nuclear Materials and Energy

Tritium self-sufficiency presents a critical engineering challenge for DEMO, requiring efficient breeding and extraction systems, as well as minimizing tritium losses to the surrounding systems, such as plasma-facing components, vacuum vessel, cooling system, etc. Structural and plasma-facing components will act as a tritium sink, as tritium will be accumulated in the bulk of these components due to energetic particle bombardment and may permeate out of the vacuum system. The design of the plasma-facing components will consequently directly influence the plant lifetime, operational safety and cost of any future power plant. Therefore, modeling of tritium retention and permeation in these components is required for the engineering designs of the tritium breeding and safety systems. In this work, the diffusion-transport code TESSIM-X is benchmarked against the well-established TMAP7 code and a comparison with a simplified DEMO-relevant test case is performed. The use of either code for modeling of DEMO conditions is discussed. Following this, TESSIM-X is used to provide a preliminary assessment of tritium permeation and retention in the DEMO first wall, based on the current WCLL (Water Cooled Lithium Lead) and HCPB (Helium Cooled Pebble Bed) breeding blanket designs.

Preliminary estimates of tritium permeation and retention in the first wall of DEMO due to ion bombardment