strength concrete

undrained shear

uniaxial compressive

rock joints

interface shear

principal stress

shear tests

intermediate principal stress

peak strength

Construction and Building Materials

• Many rock-concrete specimens with the same natural interface were manufactured. • Damage degree of concrete surface performed localization and nonuniformity. • Concrete strength and normal load affected the shear strength of rock-concrete interface. • A formula of concrete-rock interface for practical purpose was proposed. The shearing performance and strength of the interface between rock foundations and structural concrete is a key issue for safety estimation in geotechnical engineering containing rock-concrete interface. In this paper, we focused on the effects of concrete wall strength and normal stress on the unbonding performances of sandstone-concrete interface. First, many sandstone-concrete specimens containing a natural dam bedrock interface had been produced by using “3D optical scanning technology + 3D digital engraving technology + pouring concrete” method. Subsequently, after the sandstone-concrete specimens were prepared, a series of shear tests for these sandstone-concrete specimens were carried out under different normal loading conditions. Finally, the shear characteristics of sandstone-concrete interface were discussed, and an improved rock-concrete shear strength formula was proposed based on the exposed experimental tests and theoretical derivation. Three primary outcomes are as follows: (i) shear damage only occurred at some special positions of the concrete wall, and its degree of shear damage gradually increased with increasing normal stress; (ii) the damage degree of the concrete surface performed obvious localization and nonuniformity was affected by the concrete strength; (iii) the global shear strength and residual strength of the rock-concrete interface were affected by the concrete strength and the normal load. Moreover, an improved rock-concrete shear strength formula was proposed based on the experimental cognition. This strength formula considers both the interface roughness and the mechanical strength of rock/concrete materials, and is more reasonable for estimating the shear s...

Deformation and failure behaviours of rock-concrete interfaces with natural morphology under shear testing