silica fume

pervious concrete

recycled concrete

recycled aggregates

blast furnace slag

recycled aggregate

water absorption

strength mpa

cement

coir geotextiles

Construction and Building Materials

• Effect of pumice powder and nano-clay as Portland cement replacement is investigated. • Pervious concrete with different percentages of recycled concrete aggregate (RCA) is produced. • Industrial and recycled fibers are incorporated in pervious concrete mixes. • Mix containing 50% pumice powder and 100% RCA meets the strength and permeability requirements of pervious concrete. • Pervious concrete with 50% RCA and 2% steel fiber can be used for structural application. Pervious concrete (PC) has been widely used to construct concrete pavements and to increase the permeable surfaces all over the world. With the boost in the use of PC, it is necessary to make it more environmental-friendly and cost efficient. This study investigates employing recycled concrete aggregate (RCA) and pozzolanic additives as a partial replacement (PR) of natural coarse aggregate (NCA) and Portland cement, respectively. For this purpose, the NCA was replaced with 10%, 25%, 50% and 100% RCA and the Portland cement was replaced with 10%, 25% and 50% pumice used in combination with 1–3% nano-clay (NC). The compressive and flexural strengths, void content, density, and permeability of concrete were evaluated. Moreover, the effect of adding three different types of fibers including steel fiber (STF), macro-fiber (MF), and waste plastic fiber (WPF) at volume fractions of 1% and 2% on the properties of concrete was studied. A total number of 7791 specimens from 371 mixtures were cast and tested. Using RCA decreased density, compressive strength (CS) (up to 58%) and flexural strength (FS) (up to 64%) and increased the void content and permeability (up to 15%) of concrete. The use of pumice generally reduced the early-age strength of concrete; however, using 10–25% pumice increased the mechanical strength at 90 days. Incorporating 1–3% NC also had positive effects on the strength properties and led to a minor reduction in permeability. STF performed better than MF and WPF, and adding 1% STF, MF, and WPF increased the 180-day FS of RC25 by 78.9%, ...

Effect of pumice powder and nano-clay on the strength and permeability of fiber-reinforced pervious concrete incorporating recycled concrete aggregate