Effect of cellulose size-concentration on the structure of polyvinyl alcohol hydrogels.

Published on Oct 1, 2020in Carbohydrate Polymers7.182
· DOI :10.1016/J.CARBPOL.2020.116612
Gabriel Goetten de Lima9
Estimated H-index: 9
(UFPR: Federal University of Paraná),
Bruno Dias Ferreira1
Estimated H-index: 1
(UFPR: Federal University of Paraná)
+ 4 AuthorsWashington Luiz Esteves Magalhães (UFPR: Federal University of Paraná)
Sources
Abstract
Abstract Microfibrillated cellulose as a reinforcement agent has been investigated extensively due to their unique characteristics, which can reorder the structure of polymers and hydrogels leading to improved mechanical properties with minimal disadvantages in terms of the targeted original applications. However, effect of using a macro- to a micro-fibrillated cellulose onto polyvinyl alcohol hydrogels is still unknown, because of the unique ability for both to be produced as hydrogels from freeze-thawing mechanisms – hydrogen bonding - there is a potential synergism. Therefore, macro and microfibrillated kraft bleached paper was synthesised at various concentrations on polyvinyl alcohol hydrogels. The overall effect presented a strong interaction between both compounds but it was increased with macrofibrillated cellulose. Increase in crystallinity was also observed with a macro-sized fibre without variation on tensile elastic modulus but an overall improvement was perceived on thermal properties and a slower swelling rate with a microfibrillated cellulose.
📖 Papers frequently viewed together
2016
5 Authors (Y. Li, ..., L. V. Hai)
64 Citations
5 Citations
References40
Newest
This review article considers published evidence regarding effects of particle size on mechanical properties of plastic matrix materials filled with cellulose-based reinforcements. Cellulosic or wood-based reinforcements in plastic matrices can contribute to higher modulus, lower density, and less tendency to sag in comparison with the matrix phase by itself, while still allowing the resulting material to be cut or milled. Although cellulosic materials are generally too hydrophilic to adhere wel...
6 CitationsSource
#1Zuo Wang (SUES: Shanghai University of Engineering Sciences)H-Index: 1
#2Yaoke Ding (SUES: Shanghai University of Engineering Sciences)H-Index: 1
Last. Jincheng Wang (SUES: Shanghai University of Engineering Sciences)H-Index: 1
view all 3 authors...
In this work, cellulose nanocrystal (CNC) was modified by an ureido-pyrimidinone (UPy) system based on quadruple hydrogen bondings, and CNC-UPy was obtained. Then, this powder was added into polyvinyl alcohol (PVA), and PVA/CNC-UPy composite membranes and hydrogels were prepared. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), polarizing optical microscopy (POM) and particle size distribution (PSD) were used to characterize CNC-UPy. From the FTIR results, the characteris...
9 CitationsSource
#1F. C. Claro (UFPR: Federal University of Paraná)H-Index: 3
#2Mailson Matos (UFPR: Federal University of Paraná)H-Index: 5
Last. Washington Luiz Esteves Magalhães (UFPR: Federal University of Paraná)
view all 6 authors...
Abstract Understanding of how hemicellulose acts on the rheology of microfibrillated cellulose in suspension or after drying is insufficient. In this study, different concentrations of hemicellulose in the cellulose pulp of Eucalyptus sp. were obtained by alkaline treatment with potassium hydroxide. The treated pulps and the suspension of microfibrils obtained were characterized by thermogravimetric analysis, zeta potential, scanning electron microscopy, rheological analysis, X-ray diffraction a...
10 CitationsSource
#1Erwan Gicquel (CNRS: Centre national de la recherche scientifique)H-Index: 6
#2Céline Martin (UGA: University of Grenoble)H-Index: 4
Last. Julien Bras (Institut Universitaire de France)H-Index: 62
view all 9 authors...
This study investigates the adsorption of a block copolymer composed of a poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) cationic polyelectrolyte and a poly(di(ethylene glycol) methyl ethermethacrylate) (PDEGMA) on oxidized cellulose nanocrystals (TO-CNCs) to produce hydrogels. PDMEAMA-b-PDEGMA was synthesized by atom-transfer radical polymerization. The extent and dynamics of the adsorption of PDMAEMA-b-PDEGMA on TO-CNCs were determined by electromechanical microbalance and optical techniq...
12 CitationsSource
#1Esmaiel Jabbari (USC: University of South Carolina)H-Index: 36
Protein-based biopolymers derived from natural tissues possess a hierarchical structure in their native state. Strongly solvating, reducing and stabilizing agents, as well as heat, pressure, and enzymes are used to isolate protein-based biopolymers from their natural tissue, solubilize them in aqueous solution and convert them into injectable or preformed hydrogels for applications in tissue engineering and regenerative medicine. This review aims to highlight the need to investigate the nano-/mi...
13 CitationsSource
#1Facundo Ignacio Altuna (CONICET: National Scientific and Technical Research Council)H-Index: 10
#2Carmen C. Riccardi (National Research Council)H-Index: 28
Last. Pablo Marcelo Stefani (National Research Council)H-Index: 21
view all 5 authors...
This work analyzes the effect of the anhydride excess on the nonisothermal curing kinetics and on the final properties of synthetic and biobased epoxy resins. Diglycidyl ether of bisphenol A (DGEBA) and epoxidized soybean oil (ESO) were crosslinked using methyltetrahydrophthalic anhydride (MTHPA) as a curing agent and 1-methylimidazole (1MI) as an initiator. It was shown that the ESO/MTHPA/1MI system reacts slower than the DGEBA/MTHPA/1MI system, giving place to a more significant evaporation of...
3 CitationsSource
#1Katrina M. Hatch (UAB: University of Alabama at Birmingham)H-Index: 2
#2Jana Hlavata (Technical University of Liberec)H-Index: 1
Last. Andrei Stanishevsky (UAB: University of Alabama at Birmingham)H-Index: 24
view all 6 authors...
Nanocellulose/polyvinylpyrrolidone (nCel/PVP) fibrous composite materials containing rod-like nanocrystalline cellulose particles with the lengths varying in the range from 100 to 2000 nm were prepared by using DC electrospinning. The particle size had a strong effect on the precursor viscosity, process efficiency, and resulting fiber diameter. The thermal crosslinking of nCel/PVP composite nanofibers with up to 1.0 : 8.0 nCel/PVP weight ratio resulted in fibrous membranes with textural, air tra...
2 CitationsSource
#1Ana Balea (Complutense University of Madrid)H-Index: 16
#2Elena Fuente (Complutense University of Madrid)H-Index: 23
Last. Carlos Negro (Complutense University of Madrid)H-Index: 29
view all 4 authors...
Nanocelluloses (NCs) are bio-based nano-structurated products that open up new solutions for natural material sciences. Although a high number of papers have described their production, properties, and potential applications in multiple industrial sectors, no review to date has focused on their possible use in cementitious composites, which is the aim of this review. It describes how they could be applied in the manufacturing process as a raw material or an additive. NCs improve mechanical prope...
39 CitationsSource
#1Lian-Hua Fu (BFU: Beijing Forestry University)H-Index: 15
#2Chao Qi (SZU: Shenzhen University)H-Index: 30
Last. Pengbo Wan (Huada: Beijing University of Chemical Technology)H-Index: 31
view all 4 authors...
In recent decades, cellulose has been extensively investigated due to its favourable properties, such as hydrophilicity, low-cost, biodegradability, biocompatibility, and non-toxicity, which makes it a good feedstock for the synthesis of biocompatible hydrogels. The plentiful hydrophilic functional groups (such as hydroxyl, carboxyl, and aldehyde groups) in the backbone of cellulose and its derivatives can be used to prepare hydrogels easily with fascinating structures and properties, leading to...
64 CitationsSource
#1Fengcai Lin (Fujian Agriculture and Forestry University)H-Index: 12
#2Ruting Zheng (Fujian Agriculture and Forestry University)H-Index: 1
Last. Beili Lu (Fujian Agriculture and Forestry University)H-Index: 8
view all 8 authors...
Abstract A combination of conductive polymer with natural biomass is an ideal alternative to the classical conductive materials. In this study, PPy/SA/TOMFC composite hydrogels were fabricated by incorporation of TEMPO-oxidized microfibrillated cellulose (TOMFC) into the alginate-based matrix along with the in situ polymerization of pyrrole monomer. It was found that the mechanical and conductive properties of the composite hydrogels were associated with the concentration of TOMFC, which facilit...
25 CitationsSource
Cited By10
Newest
#1Jianquan Hu (Tianjin University of Science and Technology)
#2Yinglong Wu (Tianjin University of Science and Technology)
Last. Dayong Ding (Tianjin University of Science and Technology)
view all 8 authors...
Abstract null null Ionic conductive hydrogels have been widely applied in sensors, energy storage and soft electronics recently. However, most of the polyvinyl alcohol (PVA) based ionic hydrogels are mainly fabricated by soaking the hydrogels in high concentration electrolyte solution which can induce the waste of electrolyte and solvent. Herein, we have designed cellulose nanofibrils (CNF) and ZnSO4 reinforced PVA based hydrogels through a one-pot simple freezing-thawing method at low ZnSO4 con...
Source
#1Gongduan FanH-Index: 14
#2Zhong Chen (FZU: Fuzhou University)H-Index: 3
view all 5 authors...
Source
#2Wei-Wei Zhao (NUPT: Nanjing University of Posts and Telecommunications)H-Index: 42
Last. Qiang Zhao (NUPT: Nanjing University of Posts and Telecommunications)H-Index: 64
view all 0 authors...
Source
#1Weijun Yang (Jiangnan University)H-Index: 20
#2Fei Xu (Jiangnan University)H-Index: 64
Last. Jose Maria KennyH-Index: 102
view all 11 authors...
Abstract null null In this study, Ag nanoparticles were firstly reduced on the surface of lignin nanoparticles (LNPAg) by direct reaction of silver nitrate without the use of a catalyst. Thermogravimetric analysis, Zeta potential and transmission electron microscopy measurements were performed to give evidence of the effectiveness of the reaction. After that, glutaraldehyde crosslinked PVA hydrogels, were produced by addition of unmodified LNP and Ag loaded LNP (LNPAg) in presence of cellulose n...
Source
#1William Xaveriano Waresindo (ITB: Bandung Institute of Technology)
#2Halida Rahmi Luthfianti (ITB: Bandung Institute of Technology)
Last. Khairurrijal Khairurrijal (ITB: Bandung Institute of Technology)H-Index: 11
view all 6 authors...
A polyvinyl alcohol (PVA) hydrogel loaded with guava leaf extract (GLE) has potential applications as a wound dressing with good antibacterial activity. This study succeeded in fabricating a PVA hydrogel containing GLE using the freeze–thaw (FT) method. By varying the GLE concentration, we can adjust the physical properties of the hydrogel. The addition of GLE results in a decrease in cross-linking during gelation and an increase in the pore size of the hydrogels. The increase of the pore size m...
Source
#1Gabriel Goetten de Lima (UFPR: Federal University of Paraná)H-Index: 9
#2Emílio L. de S. Júnior (UFCG: Federal University of Campina Grande)
Last. Marcelo Jorge Cavalcanti de Sá (UFPR: Federal University of Paraná)
view all 10 authors...
This work investigates peripheral nerve regeneration using membranes consisting of pure chitosan (CHI), which was further blended with nanofibrillated cellulose, with citric acid as crosslinker, with posterior addition of polyvinyl alcohol, with subsequent freeze thawing. Nanocellulose improves the mechanical and thermal resistance, as well as flexibility of the film, which is ideal for the surgical procedure. The hydrogel presented a slow rate of swelling, which is adequate for cell and drug de...
Source
#1Qun Yang (SUES: Shanghai University of Engineering Sciences)
#2Jinfeng Wang (Deakin University)H-Index: 22
view all 4 authors...
Composite hydrogel films of bacterial cellulose/collagen/polyvinyl alcohol were prepared by soaking method using bacterial cellulose hydrogel (BC) was as the base material, collagen (COL) and polyvinyl alcohol (PVA) were introduced as the reinforcement material to further improve the tensile strength especially elongation at break. Morphology, mechanical property, and thermal stability of composite hydrogel films were also investigated. The swelling behavior was studied using Schott’s second-ord...
Source
view all 8 authors...
With increasing pathogenic bacterial infection that is occurring worldwide, antibacterial therapy has become an important research field. There is great antimicrobial potential in the nanomaterial-based metal–organic framework (MOF) platform because it is highly biocompatible, biodegradable, and nontoxic, and it is now widely used in the anticancer agent industry and in the production of medical products. This review summarizes the possible mechanisms of representative MOF-based nanomaterials, a...
4 CitationsSource
The effectiveness of tannic acid as antimicrobial and wound healing for burns have been shown for a century; however, uncontrolled target dosage may result in undesirable side-effects. Remarkably, tannic acid polyphenols compounds crosslinked with polymeric materials produce a strong composite containing the beneficial properties of this tannin. However, investigation of the crosslink structure and its antibacterial and regenerative properties are still unknown when using nanocellulose by mechan...
Source
#1Meysam Aliabadi (Gorgan University)H-Index: 1
#2Bor Shin Chee (Athlone Institute of Technology)H-Index: 4
Last. Gabriel Goetten de Lima (UFPR: Federal University of Paraná)H-Index: 9
view all 8 authors...
Microfibrillated cellulose films have been gathering considerable attention due to their high mechanical properties and cheap cost. Additionally, it is possible to include compounds within the fibrillated structure in order to confer desirable properties. Ilex paraguariensis A. St.-Hil, yerba mate leaf extract has been reported to possess a high quantity of caffeoylquinic acids that may be beneficial for other applications instead of its conventional use as a hot beverage. Therefore, we investig...
3 CitationsSource