A new single crystal high entropy alloy with excellent high-temperature tensile property

Published on Apr 15, 2020
· DOI :10.1088/2053-1591/AB8491
Huaqiang Chen1
Estimated H-index: 1
,
Xiaotan Yuan1
Estimated H-index: 1
+ 6 AuthorsYunbo Zhong20
Estimated H-index: 20
Source
Abstract
📖 Papers frequently viewed together
86 Citations
2005
1 Author (WU Xue-ren)
1 Citations
1965
1 Author (J L Taylor)
References44
Newest
#1Zhou Tongjin (HIT: Harbin Institute of Technology)H-Index: 3
#2Hongsheng Ding (HIT: Harbin Institute of Technology)H-Index: 23
Last. Huaxia ZhangH-Index: 3
view all 8 authors...
Abstract Tensile tests for a high W-content (13–15.5 wt%) cast Ni-based superalloy were carried out at temperatures ranging from 20 °C to 1100 °C. Temperature was varied in increments of 100 °C after reaching 500 °C. The tensile strength of the superalloy used in this study was 150–200 MPa higher than that of other low W-content (
9 CitationsSource
#1Amy Goodfellow (University of Cambridge)H-Index: 6
#2Enrique I. Galindo-Nava (University of Cambridge)H-Index: 21
Last. Howard J. Stone (University of Cambridge)H-Index: 31
view all 4 authors...
Abstract Models of the multiple strengthening mechanisms operating concurrently in nickel-based superalloys have been combined to provide predictions of the overall yield strength. Although these are established models, when all of the individual strengthening mechanisms were taken into account, it was found that these models did not compare well in magnitude to experimental data for the yield strength of several commercial alloys, although the trends were well described. To further explore the ...
17 CitationsSource
#1Zhiming Guo (CAS: Chinese Academy of Sciences)H-Index: 2
#2Aijun Zhang (CAS: Chinese Academy of Sciences)H-Index: 1
Last. Juhu Meng (CAS: Chinese Academy of Sciences)H-Index: 1
view all 4 authors...
To improve the high-temperature strength and decrease the density of NbTaWMo alloys, addition of light element Si producing the second-phase silicide is employed. Refractory NbTaWMoSix (x = 0, 0.25, 0.5, 0.75) high-entropy alloys are produced by spark plasma sintering. The phase evolution, microstructure, compressive mechanical properties, and high-temperature hardness are investigated in this study. It reveals that there is only a disordered body-centered cubic (BCC) phase in the matrix NbTaWMo...
12 CitationsSource
#1T. Yang (CityU: City University of Hong Kong)H-Index: 18
#2Yilu Zhao (CityU: City University of Hong Kong)H-Index: 13
Last. C.T. Liu (CityU: City University of Hong Kong)H-Index: 106
view all 13 authors...
Alloy design based on single–principal-element systems has approached its limit for performance enhancements. A substantial increase in strength up to gigapascal levels typically causes the premature failure of materials with reduced ductility. Here, we report a strategy to break this trade-off by controllably introducing high-density ductile multicomponent intermetallic nanoparticles (MCINPs) in complex alloy systems. Distinct from the intermetallic-induced embrittlement under conventional wisd...
269 CitationsSource
#1Yao-Jian Liang (BIT: Beijing Institute of Technology)H-Index: 5
#2L. Wang (BIT: Beijing Institute of Technology)H-Index: 10
Last. Hongnian Cai (BIT: Beijing Institute of Technology)H-Index: 16
view all 15 authors...
Precipitation-hardening high-entropy alloys (PH-HEAs) with good strength−ductility balances are a promising candidate for advanced structural applications. However, current HEAs emphasize near-equiatomic initial compositions, which limit the increase of intermetallic precipitates that are closely related to the alloy strength. Here we present a strategy to design ultrastrong HEAs with high-content nanoprecipitates by phase separation, which can generate a near-equiatomic matrix in situ while for...
124 CitationsSource
#1L.X. Zhang (HIT: Harbin Institute of Technology)H-Index: 12
#1Lu Zhang (HIT: Harbin Institute of Technology)H-Index: 6
Last. Bangsheng Li (HIT: Harbin Institute of Technology)H-Index: 7
view all 5 authors...
Abstract To achieve balance of high strength and high ductility remains a difficult problem for metallic materials, especially in as-cast alloys. We combined the design concepts of high-entropy alloys (HEAs) and Ni-based superalloys, and designed two new Ni48.7Co17.5Cr10Fe9.3Al7.5Ti7 and Ni47.7Co17.5Cr10Fe9.3Al7.5Ti7Mo1 (at%) precipitation-hardened cast HEAs. Both two alloys have face-centered cubic (fcc) high-entropy matrix + nano γ′ (Ni3(Al,Ti)-type) particles structure. Fine γ′ particles with...
20 CitationsSource
#1D.J. Liu (Yanshan University)H-Index: 4
#2Pengfei Yu (Yanshan University)H-Index: 16
Last. Riping Liu (Yanshan University)H-Index: 40
view all 5 authors...
Abstract To find high-temperature high-entropy alloys, a series of quaternary non-equimolar AlxCo15Cr15Ni70-x (x in atomic ratio, 0 ≤ x ≤ 35) alloys was designed, based on the Al-Ni binary system and prepared by arc-melting. The crystal structure, microstructure, and compressive properties of these alloys at both room and high temperatures were characterized. This AlxCo15Cr15Ni70-x system showed a lattice structure transition from face-centered cubic (FCC) to body-centered cubic (BCC), as the Al...
17 CitationsSource
#1Rui Feng (UT: University of Tennessee)H-Index: 14
#2Michael C. Gao (AECOM)H-Index: 36
Last. Peter K. Liaw (UT: University of Tennessee)H-Index: 94
view all 10 authors...
Abstract Light-weight high-entropy alloys (HEAs) with a vast alloy-design space have offered new avenues to explore novel low-cost, high strength-to-weight ratio structural materials. Studying their phase stability and possible transformations is critical for designing microstructures for optimal material properties. However, the complex local atomic environment of HEAs poses challenges to the fundamental understanding of phase stability and transformation behaviors. The present study investigat...
44 CitationsSource
#1Weiran Zhang (USTB: University of Science and Technology Beijing)H-Index: 2
#2Peter K. Liaw (UT: University of Tennessee)H-Index: 94
Last. Yong Zhang (USTB: University of Science and Technology Beijing)H-Index: 112
view all 3 authors...
As human improve their ability to fabricate materials, alloys have evolved from simple to complex compositions, accordingly improving functions and performances, promoting the advancements of human civilization. In recent years, high-entropy alloys (HEAs) have attracted tremendous attention in various fields. With multiple principal components, they inherently possess unique microstructures and many impressive properties, such as high strength and hardness, excellent corrosion resistance, therma...
239 CitationsSource
#1Te Kang Tsao (NTHU: National Tsing Hua University)H-Index: 8
#2An-Chou Yeh (NTHU: National Tsing Hua University)H-Index: 22
Last. Sheng-Rui Jian (ISU: I-Shou University)H-Index: 28
view all 7 authors...
This article presents the high temperature tensile and creep behaviors of a novel high entropy alloy (HEA). The microstructure of this HEA resembles that of advanced superalloys with a high entropy FCC matrix and L12 ordered precipitates, so it is also named as “high entropy superalloy (HESA)”. The tensile yield strengths of HESA surpass those of the reported HEAs from room temperature to elevated temperatures; furthermore, its creep resistance at 982 °C can be compared to those of some Ni-based...
66 CitationsSource
Cited By1
Newest
#1Chuang HeH-Index: 2
#2Taiwen HuangH-Index: 9
Last. Lin Liu
view all 7 authors...
Source
#1Xiaotong Tong (CAS: Chinese Academy of Sciences)
#2Qifan Zhang (CAS: Chinese Academy of Sciences)H-Index: 3
Last. Xinyu Zhang (CAS: Chinese Academy of Sciences)H-Index: 9
view all 4 authors...
Abstract The computational fluid dynamics method is introduced to study the dynamic response of pressure transmission tubes in compressible flow. A simple theoretical model based on the flow structure was developed to reveal the physical mechanism of the tube dynamic response. According to the dominant variables in the model, the influence of Mach number, tube configuration and tube cooling was numerically studied with CFD tools. The CFD results indicate that the dynamic response characteristics...
Source
#1Shaik Adil (Indian Institute of Technology Madras)H-Index: 3
#2M.V. Suraj (Indian Institute of Technology Madras)
Last. B.S. Murty (Indian Institute of Technology Madras)H-Index: 61
view all 7 authors...
Abstract In this study, the effect of Fe in precipitation strengthened Al-Co-Cr-Fe-Ni-Ti complex concentrated alloys (CCAs) is investigated. The amount of Fe significantly affected the γ′ morphology, microstructural stability, lattice misfit, solvus temperature and mechanical behaviour. The decrease in the Fe content from 11.5 (Al7.8Co20.6Cr12.2Fe11.5Ni40.7Ti7.2) to 0 (Al7.8Co20.6Cr12.2Ni52.2Ti7.2) at% changed the precipitate morphology from spherical to cuboidal upon 50h ageing at 900°C. Also, ...
Source