Surface roughness

Physics

Cutting tool

Coating

Surface finish

Engineering

Lubrication

Composite material

Vibration

Tool wear

Metallurgy

Materials science

Mold

Quantum mechanics

Machining

Mechanical engineering

Coolant

Journal of Materials Research and Technology

Today, developments in technology have gained momentum more than ever, and the need for efficiency in production as well as in the ecological domain has increased significantly. Studies examining dry machining and coolant removal have been superseded by those presenting new cooling and lubrication techniques. The effects on surface roughness directly related to final product quality are being investigated in terms of tool life and employee health. This has resulted in more frequent use of the eco-friendly minimum quantity lubrication (MQL) technique, which has now become a major competitor to dry and coolant machining. In this study, AISI D2 cold work tool steel, a material widely used in the mold industry, was used as the workpiece. Tests were carried out under dry and MQL conditions and the temperature, cutting tool vibration amplitude, tool wear, surface roughness and tool life were evaluated. The experiments were carried out using two different cutting tool coating types (CVD-chemical vapor deposition and PVD-physical vapor deposition) and three different cutting speeds (60, 90 and 120 m/min) at a constant cutting depth (1 mm) and feed rate (0.09 mm/rev). Results revealed that tool wear, cutting temperature and cutting tool vibration amplitude were lower by 23, 25, and 45%, respectively, compared to dry cutting. Because of these improvements, the surface roughness of the workpiece was improved by 89% and tool life was increased by up to 267%.

The effect of vibration and cutting zone temperature on surface roughness and tool wear in eco-friendly MQL turning of AISI D2