modules

nuclear polyhedrosis

clinical psychology

Materials Science and Engineering R Reports

Indoor photovoltaics (IPVs), which convert the indoor light energy into direct electricity, have attracted research attention due to their potential use as an excellent amicable solution of sustainable power source to drive low-power-needed sensors for the internet of things (IoT) applications. Our daily life adopts various indoor light sources, such as indirect sunlight, incandescent lamps, halogen lamps, fluorescent lamps, and LED bulbs, that typically deliver lower light intensity (200–1000 lux) as compared to that of sun light (∼100,000 lx). In this review, we firstly classified the indoor lights depending on their working mechanism and resulting emission spectrum. Because the indoor light intensities are rather low that may lead to overestimate/underestimate the power conversion efficiency (PCE) of IPV devices, then, the cautious points for correctly measuring the indoor light intensity as well as the device characteristics are summarized. Several light sources with various light intensities are reported so far, but for lack of common or standard calibration meter that induces a ambiguity in PCE determination, so we suggest/propose to use a universal LED lux meter with NIST-traceable calibration (e.g. Extech LT40-NIST) and also recommended the device results are expressed in maximum power point P max along with PCE values. It is generally believed that the materials play key roles on the performance of the IPV devices. Since the indoor light intensity is much weaker as compared to that of outdoor irradiation, the typical inferior photo-stability of organic materials under sunlight may not be as crucial as we considered to harvest indoor light energy, opening a great room for organic IPV material developments. In principle, all materials for outdoor PVs may also be useful for IPVs, but the fundamental material requirement for IPVs which needs sufficiently covering the absorption range between the 350–700 nm with high molar extinction coefficient should be primarily concerned. In order to get the thorough know...

Device characteristics and material developments of indoor photovoltaic devices