In vitro evaluation of diopside/baghdadite bioceramic scaffolds modified by polycaprolactone fumarate polymer coating.

Published on Jan 1, 2020in Materials Science and Engineering: C5.88
· DOI :10.1016/J.MSEC.2019.110176
Sorour Sadeghzade8
Estimated H-index: 8
(PSU: Pennsylvania State University),
Sorour Sadeghzade3
Estimated H-index: 3
(PSU: Pennsylvania State University)
+ 1 AuthorsAli Doostmohammadi3
Estimated H-index: 3
(York University)
Sources
Abstract
Abstract Porous Si-based ceramic scaffolds are widely attracted in biomedical tissue engineering application. Despite the attractive properties of these materials, their weak mechanical properties and high degradability in vitro and in vivo environment can limit their application as biomedical devises. Applying a thin layer of polymer on the surface of porous scaffolds can improve the mechanical properties and control the degradation rate. In this study, we produced new modified scaffolds with polymers coating in order to improved mechanical and biological properties of Si-based ceramics scaffolds. The results showed that applying 6 wt% PCLF polymer on the surface of Bagh-15 wt%Dio scaffolds delayed apatite formation compared to unmodified scaffolds. On the other hand, in the modified scaffolds, apatite formation was observed. The degradation rate of unmodified scaffolds was decreased around 82% after 28 days soaking in PBS solution. Based on the MTT assay and SEM micrographs, the BMS cells were spread and attached well on the surface of the scaffolds, which indicated a good biocompatibility. The results showed that these scaffolds have the potential to be used as a temporary substrate for bone tissue engineering application.
📖 Papers frequently viewed together
74 Citations
9 Citations
5 Citations
References54
Newest
#1Narges Shokri (Tehran University of Medical Sciences)H-Index: 1
#2Hamid Akbari Javar (UM: University of Malaya)H-Index: 1
Last. Ebrahim Azizi (Tehran University of Medical Sciences)H-Index: 27
view all 6 authors...
Polycaprolactone fumarate (PCLF) is a biocompatible and biodegradable polyester which has been evaluated for tissue engineering. Hydrophobic PCLF nanoparticles (NPs) may be uptaken by reticule endotelial system rich organs and useful for treatment of related tumors. NPs of three PCLFs were produced through nanoprecipitation method. Crosslinked (CR) NPs were prepared using Benzyl peroxide (BPO) and N-vinyl pyrrolidone (NVP) under heating. Doxorubicin HCl (Dox) loaded NPs of PCLF530, 1250 and 2000...
10 CitationsSource
#1Sorour Sadeghzade (PSU: Pennsylvania State University)H-Index: 8
#1Sorour Sadeghzade (PSU: Pennsylvania State University)H-Index: 3
Last. Fariborz Tavangarian (PSU: Pennsylvania State University)H-Index: 5
view all 4 authors...
Abstract In recent decades, porous silica-based bioceramic scaffolds have received great attention for treatment of bone defects. One of the main drawbacks of these scaffolds is their inherent brittle nature and high degradation rate. Recently, using bioactive and biodegradable polymer coatings on the surface of scaffolds improves their mechanical properties and the ability to control their degradation rate. In this work, highly porous diopside/baghdadite composite scaffolds with and without sur...
13 CitationsSource
#1Sorour Sadeghzade (IUT: Isfahan University of Technology)H-Index: 8
#2Rahmatollah Emadi (IUT: Isfahan University of Technology)H-Index: 26
Last. Fariborz Tavangarian (PSU: Pennsylvania State University)H-Index: 20
view all 4 authors...
Abstract Porous ceramic scaffolds are synthetic implants, which support cell migration and establish sufficient extracellular matrix (ECM) and cell-cell interactions to heal bone defects. Hydroxyapatite (HA) scaffolds is one of the most suitable synthetic scaffolds for hard tissue replacement due to their bioactivity, biocompatibility and biomimetic features. However, the major disadvantages of HA is poor mechanical properties as well as low degradability rate and apatite formation ability. In t...
5 CitationsSource
#1Sorour Sadeghzade (IUT: Isfahan University of Technology)H-Index: 8
#2Rahmatollah Emadi (IUT: Isfahan University of Technology)H-Index: 26
Last. Sheyda Labbaf (IUT: Isfahan University of Technology)H-Index: 14
view all 3 authors...
Abstract A bioactive hardystonite (HT) - diopside (Dio) Nano-composite scaffold was fabricated by the space holder method. The structure, morphology and bioactivity potential of the Nano-composite scaffolds were examined using transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The scaffold with optimized mechanical properties was HT-15 wt%Dio that had a total, interconnected porosity, micro and m...
26 CitationsSource
#1Sorour Sadeghzade (IUT: Isfahan University of Technology)H-Index: 8
#2Fateme Shamoradi (IUT: Isfahan University of Technology)H-Index: 1
Last. Fariborz Tavangarian (Penn State Harrisburg)H-Index: 20
view all 4 authors...
Abstract Porous baghdadite scaffold has received great attention as a candidate for bone tissue engineering application due to its remarkable bioactivity, biocompatibility, and good bone formation ability. A few studies have been focused on improving the mechanical properties of baghdadite scaffolds. Recently, space holder method has been introduced as a new and viable technique to prepare bioceramic scaffolds with interconnected pores and suitable mechanical properties. In this study, for the f...
28 CitationsSource
#1Yasamin HosseiniH-Index: 1
#2Rahmatollah EmadiH-Index: 26
Last. Ali Doostmohammadi (Shahrekord University)H-Index: 13
view all 4 authors...
Considerable efforts have been devoted toward the development of electrospun scaffolds based on poly(e-caprolactone) (PCL) for bone tissue engineering. However, most of previous scaffolds have lacked the structural and mechanical strength to engineer bone tissue constructs with suitable biological functions. Here, we developed bioactive and relatively robust hybrid scaffolds composed of diopside nanopowder embedded PCL electrospun nanofibers. Incorporation of various concentrations of diopside n...
20 CitationsSource
#1Sorour Sadeghzade (IUT: Isfahan University of Technology)H-Index: 8
#2Rahmatollah Emadi (IUT: Isfahan University of Technology)H-Index: 26
Last. Mozhgan Naderi (IUT: Isfahan University of Technology)H-Index: 1
view all 4 authors...
Abstract In recent decades, bone scaffolds have received a great attention in biomedical applications due to their critical roles in bone tissue regeneration, vascularization, and healing process. One of the main challenges of using scaffolds in bone defects is the mechanical strength mismatch between the implant and surrounding host tissue which causes stress shielding or failure of the implant during the course of treatment. In this paper, space holder method was applied to synthesize diopside...
27 CitationsSource
#1Marjan Eilbagi (IUT: Isfahan University of Technology)H-Index: 1
#2Rahmatollah Emadi (IUT: Isfahan University of Technology)H-Index: 26
Last. Ali Valiani (IUMS: Isfahan University of Medical Sciences)H-Index: 9
view all 5 authors...
Abstract Despite the attractive characteristics of three-dimensional pure hydroxyapatite (HA) scaffolds, due to their weak mechanical properties, researches have focused on the development of composite scaffolds via introducing suitable secondary components. The aim of this study was to develop, for the first time, three-dimensional HA-bredigite (Ca7MgSi4O16) scaffolds containing various amounts of bredigite nanopowder (0, 5, 10 and 15 wt.%) using space holder technique. Transmission electron mi...
24 CitationsSource
#1Sorour Sadeghzade (IUT: Isfahan University of Technology)H-Index: 8
#2Rahmatollah Emadi (IUT: Isfahan University of Technology)H-Index: 26
Last. Fariborz Tavangarian (Penn State Harrisburg)H-Index: 20
view all 3 authors...
Abstract In this study, single-phase hardystonite (Ca 2 ZnSi 2 O 6 ) nanopowder was synthesized by combustion synthesis method from aqueous solution of Calcium nitrate, Zinc nitrate and Tetraethyl orthosilicate. In order to characterize the obtained powders, X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were used. The effect of sucrose concentration on the purity and morphology of the obtained hardystonite powder, and its initial annealing...
18 CitationsSource
#1Sorour Sadeghzade (IUT: Isfahan University of Technology)H-Index: 8
#2Rahmatollah Emadi (IUT: Isfahan University of Technology)H-Index: 26
Last. Sheyda Labbaf (IUT: Isfahan University of Technology)H-Index: 14
view all 3 authors...
Abstract Hardystonite is currently recognized as a biocompatible bio-ceramic material for a range of medical applications. In this study, pure nano-crystalline hardystonite powder was prepared by mechanochemical synthesis of calcium carbonate, zinc oxide and silicate oxide in a planetary ball mill followed by sintering. A range of techniques including X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were applied to fully characterize the obta...
17 CitationsSource
Cited By8
Newest
#1Sushma Yadav (IIT: Indian Institute of Technology (BHU) Varanasi)H-Index: 3
#2S. Majumdar (IIT: Indian Institute of Technology (BHU) Varanasi)H-Index: 2
Last. Ram Pyare (IIT: Indian Institute of Technology (BHU) Varanasi)H-Index: 13
view all 6 authors...
Abstract In this work, for the first time, zinc substituted baghdadite (Ca3-xZnxZrSi2O9; x=0, 0.1, 0.25 and, 0.5) ceramic was successfully prepared. A solid-state ceramic synthesis route was utilized to prepare a composite for biomedical applications. The incorporation of zinc oxide reduces the synthesis temperature. The properties of composites were presented in terms of Zinc oxide amount. In-vitro bioactivity and degradation results indicated lower degradation in comparison with pure baghdadit...
Source
#1Fariborz Tavangarian (PSU: Pennsylvania State University)H-Index: 20
#2Sorour Sadeghzade (PSU: Pennsylvania State University)H-Index: 8
Last. Keivan Davami (UA: University of Alabama)H-Index: 11
view all 3 authors...
Abstract Among the major groups of materials, some polymers and resins are limited in usage due to their brittleness. To date, we lack a comprehensive solution to overcome brittleness. Mimicking from biological structures made up of ceramics with excellent strength and flexibility can help us to find a solution to this problem. In this study, for the first time, we mimicked the structure of spicules in Euplectella aspergillum (EA) sponges and developed a novel structure to improve the mechanical...
Source
#1Parinaz Abdollahiyan (Tabriz University of Medical Sciences)H-Index: 3
#2Fatemeh Oroojalian (Tehran University of Medical Sciences)
Last. Ahad Mokhtarzadeh (Tabriz University of Medical Sciences)H-Index: 33
view all 5 authors...
Abstract The tissue engineering of hard organs and tissues containing cartilage, teeth, and bones is a widely used and rapidly progressing field. One of the main features of hard organs and tissues is the mineralization of their extracellular matrices (ECM) to enable them to withstand pressure and weight. Recently, a variety of printing strategies have been developed to facilitate hard organ and tissue regeneration. Fundamentals in three-dimensional (3D) printing techniques are rapid prototyping...
1 CitationsSource
One of the best methods to prevent wound infection and speed up wound healing is wound dressing based on nanofiber–polymer scaffolds, which have acceptable antimicrobial performance and appropriate skin regeneration capabilities. In this paper, the electrospinning method was applied to synthesize the polyvinylpyrrolidone-acrylic acid hydrogel (PVPA)–eggshell membrane (ESM)–reduced graphene oxide (rGO) nanosheets nanocomposite dressings with different reduced graphene oxide contents (0, 0.5, 1, a...
Source
#2Sorour SadeghzadeH-Index: 8
Last. R. EmadiH-Index: 7
view all 3 authors...
Source
#1Hossein Jodati (METU: Middle East Technical University)H-Index: 2
#2Bengi Yilmaz (UHSA: University of Health Sciences Antigua)H-Index: 9
Last. Zafer Evis (METU: Middle East Technical University)H-Index: 20
view all 3 authors...
Abstract Bioceramics have been widely used for many years to restore and replace hard tissues including bones, teeth and mineralized matrices such as calcified cartilages at osteochondral interfaces, mainly because of their physicochemical similarity with these tissues. Calcium silicate based bioceramics have been shown to possess high bioactivity due to having high apatite-forming ability and stimulating cell proliferation, as well as biodegradability at rates appropriate to hard tissue regener...
1 CitationsSource
#1Farzad Soleymani (IUT: Isfahan University of Technology)H-Index: 1
#2Rahmatollah Emadi (IUT: Isfahan University of Technology)H-Index: 26
Last. Fariborz TavangarianH-Index: 20
view all 4 authors...
Polymer–ceramic composite coatings on magnesium-based alloys have attracted lots of attention in recent years, to control the speed of degradability and to enhance bioactivity and biocompatibility. In this study, to decrease the corrosion rate in a simulated body fluid (SBF) solution for long periods, to control degradability, and to enhance bioactivity, polycaprolactone–chitosan composite coatings with different percentages of baghdadite (0 wt.%, 3 wt.%, and 5 wt.%) were applied to an anodized ...
1 CitationsSource
#1Farzad SoleymaniH-Index: 1
#2Rahmatollah EmadiH-Index: 26
Last. Fariborz TavangarianH-Index: 20
view all 4 authors...
Magnesium alloys have received a great amount of attention regarding being used in biomedical applications; however, they show high degradability, poor bioactivity, and biocompatibility. To improve these properties, surface modification and various types of coatings have been applied. In this study, an anodized AZ91 alloy was coated with a polymer matrix composite made of polycaprolactone/chitosan (PCL/Ch) with different percentages of baghdadite to improve its resistance to corrosion, bioactivi...
5 CitationsSource