fracture propagation

emission ae

geomechanical model

hydraulic fractures

fluid pressure

uniaxial compression

damage zone

coal rock

Engineering Fracture Mechanics

Hydraulic fracturing is routinely used, but the fracturing processes that occur when rocks are hydraulically-fractured are not entirely understood and require further investigation. This study presents the acquisition, analysis and interpretation of acoustic emissions data from a series of laboratory hydraulic fracturing experiments on granite. Specimens with different orientations of two pre-cut flaws were tested under both 0 MPa and 5 MPa of vertical uniaxial stress to understand the effect of the external stress conditions. Acoustic emissions data are related to corresponding visual observations made using high-resolution and high-speed imaging. We find that in general, (1) the AE begin to occur at approximately 80% of peak pressure, (2) the focal mechanisms suggest that 55–60% of the radiation pattern could be explained by a double couple mechanism and is well-explained by simulation results, (3) hypocenter locations tended to agree well with visually observed white patching (process zone) and crack patterns, (4) spatio-temporal analysis revealed points in time at which microcrack coalescence were detected by AE, (5) that the AE could be used to make a non-unique prediction of crack initiation, and lastly (6) that exponential AE energy accumulation in the last 5–10 s prior to crack initiation can be modelled by time-to-failure methods.

Laboratory hydraulic fracturing of granite: Acoustic emission observations and interpretation