On the mechanical properties of monolithic and laminated nano-ceramic resin structures obtained by laser printing

Published on May 15, 2018in Composites Part B-engineering7.635
· DOI :10.1016/J.COMPOSITESB.2017.12.044
B. Henriques4
Estimated H-index: 4
(UFSC: Universidade Federal de Santa Catarina),
Bruno Henriques24
Estimated H-index: 24
(UFSC: Universidade Federal de Santa Catarina)
+ 4 AuthorsÓscar Carvalho17
Estimated H-index: 17
(University of Minho)
Source
Abstract
Abstract The purpose of this study was to evaluate the mechanical properties of laser printed monolithic and laminated nano ceramic resins (NCR) for dental prosthetic applications. Three different types of discs were produced by laser printing: monolithic NCR discs and laminated NCR discs with 100 μm (laminate_100) and 500 μm (laminate_500) resin interlayers (n = 10). To assess the adhesion strength of the photosensitive resin used as interlayer to the NCR, cylindrical specimens were produced. The biaxial flexural strength and shear bond strength of the specimens were measured using a universal testing machine. Data was statistically analyzed by one-way ANOVA followed by Tukey HSD test (α = 0.05). The microstructure and fracture surfaces were analyzed by SEM/EDS. Results were rationalized with finite element analysis (FEA). Laminate_100 specimens showed significantly higher flexural strength (∼50%) than monolithic and Laminate_500 specimens (p
📖 Papers frequently viewed together
5 Authors (G.R. Basso, ..., A. Della Bona)
24 Citations
2008
References57
Newest
#1Harshita Chadda (IITD: Indian Institute of Technology Delhi)H-Index: 3
#2Bhabani K. Satapathy (IITD: Indian Institute of Technology Delhi)H-Index: 28
Last. Alok R. Ray (IITD: Indian Institute of Technology Delhi)H-Index: 32
view all 4 authors...
Abstract The fracture toughness and wear behavior of designed and fabricated dimethacrylate (bis-Glycidyl methacrylate in combination with Triethylene glycidyl dimethacrylate as resin-matrix system) based restorative visible-light cured composites filled with hydroxyapatite (micro-filled) and silica/hydroxyapatite (micro-hybrid) combinations were evaluated. Two series of composites were prepared with filler-loadings in the range of 20–50 wt%. Conditional fracture toughness (KQ) values were deter...
25 CitationsSource
#1Bruno Henriques (UFSC: Universidade Federal de Santa Catarina)H-Index: 24
#2Miguel Ângelo Guimarães Sampaio (University of Minho)H-Index: 5
Last. Óscar Carvalho (University of Minho)H-Index: 17
view all 7 authors...
PEEK is a promising polymer possessing high mechanical strength and biocompatibility and therefore it can be associated to titanium for biomedical applications. This study aimed at producing Ti6Al4V-PEEK joints with enhanced adhesion through laser-structuring Ti6Al4V treatments. Ti6Al4V cylindrical substrates were prepared by two types of surface treatments: alumina blasting and laser structuring. The holes number and size in laser-structured surfaces was varied. PEEK was then hot pressed agains...
19 CitationsSource
#1Giulio Castori (University of Perugia)H-Index: 18
#2Emanuela Speranzini (University of Perugia)H-Index: 14
Abstract The use of laminated glass is increasing since it is able to guarantee robustness requirements so by improving the post-breaking characteristics of the glass. Due to the brittle nature of glass the reason for employing such composite materials are related to their ability to avoid cracks propagation, retain the glass fragments and present a post-cracking phase. Since the behavior of laminated glass depends on the constituent materials and especially on the type of interlayer, this resea...
28 CitationsSource
#1Shunhua Chen (UTokyo: University of Tokyo)H-Index: 10
#2Mengyan Zang (SCUT: South China University of Technology)H-Index: 17
Last. Tomonori Yamada (UTokyo: University of Tokyo)H-Index: 10
view all 5 authors...
Abstract Laminated glass is a simple sandwiched composite structure, while being widely used in the automotive industry as windshield glazings. It is considered to be safety glass due to its excellent performance in absorbing impact energy and bonding glass fragments. Meanwhile, the impact failure patterns of an automotive windshield glazing contribute to the traffic accident reconstruction. In recent decades, a growing interest has been devoted to the impact failure analysis of automotive lamin...
52 CitationsSource
#1Tamer A. Hamza (Misr International University)H-Index: 9
#2Rana M. Sherif (Cairo University)H-Index: 2
Abstract Statement of problem Dental laboratories use different computer-aided design and computer-aided manufacturing (CAD-CAM) systems to fabricate fixed prostheses; however, limited evidence is available concerning which system provides the best marginal discrepancy. Purpose The purpose of this in vitro study was to evaluate the marginal fit of 5 different monolithic zirconia restorations milled with different CAD-CAM systems. Material and methods Thirty monolithic zirconia crowns were fabric...
22 CitationsSource
#1Michael Wendler (UdeC: University of Concepción)H-Index: 10
#2Renan Belli (FAU: University of Erlangen-Nuremberg)H-Index: 23
Last. Ulrich Lohbauer (FAU: University of Erlangen-Nuremberg)H-Index: 57
view all 8 authors...
Abstract Objective Strength is one of the preferred parameters used in dentistry for determining clinical indication of dental restoratives. However, small dimensions of CAD/CAM blocks limit reliable measurements with standardized uniaxial bending tests. The objective of this study was to introduce the ball-on-three-ball (B3B) biaxial strength test for dental for small CAD/CAM block in the context of the size effect on strength predicted by the Weibull theory. Methods Eight representative chairs...
127 CitationsSource
#1Renan Belli (FAU: University of Erlangen-Nuremberg)H-Index: 23
#2Michael Wendler (UdeC: University of Concepción)H-Index: 10
Last. Ulrich Lohbauer (FAU: University of Erlangen-Nuremberg)H-Index: 57
view all 7 authors...
Abstract Objective A deeper understanding of the mechanical behavior of dental restorative materials requires an insight into the materials elastic constants and microstructure. Here we aim to use complementary methodologies to thoroughly characterize chairside CAD/CAM materials and discuss the benefits and limitations of different analytical strategies. Methods Eight commercial CAM/CAM materials, ranging from polycrystalline zirconia (e.max ZirCAD, Ivoclar-Vivadent), reinforced glasses (Vitablo...
149 CitationsSource
#1Luc Randolph (UCL: Université catholique de Louvain)H-Index: 7
#2William M. Palin (University of Birmingham)H-Index: 35
Last. Julian LeprinceH-Index: 21
view all 4 authors...
Abstract Objective The mechanical properties of dental resin-based composites (RBCs) are highly dependent on filler characteristics (size, content, geometry, composition). Most current commercial materials are marketed as “nanohybrids” (i.e. filler size Methods Micron/sub-micron particles (> or flex ) and strength (σ flex ) and micro-hardness were determined by three-point bending or with a Vickers indenter, respectively. Sorption was also determined. All experiments were carried out after one w...
67 CitationsSource
#1Nathaniel C. Lawson (UAB: University of Alabama at Birmingham)H-Index: 19
#2Ritika Bansal (IUPUI: Indiana University – Purdue University Indianapolis)H-Index: 2
Last. John O. Burgess (UAB: University of Alabama at Birmingham)H-Index: 33
view all 3 authors...
Abstract Objective To measure the mechanical properties of several CAD/CAM materials, including lithium disilicate (e.max CAD), lithium silicate/zirconia (Celtra Duo), 3 resin composites (Cerasmart, Lava Ultimate, Paradigm MZ100), and a polymer infiltrated ceramic (Enamic). Methods CAD/CAM blocks were sectioned into 2.5 mm × 2.5 mm × 16 mm bars for flexural strength and elastic modulus testing and 4 mm thick blocks for hardness and wear testing. E.max CAD and half the Celtra Duo specimens were t...
107 CitationsSource
#1Júlio C.M. Souza (UFSC: Universidade Federal de Santa Catarina)H-Index: 25
#2Ana Catarina Fernandes Bentes (University of Minho)H-Index: 1
Last. José R. B. Gomes (University of Minho)H-Index: 50
view all 8 authors...
This work has been supported by FCT (Fundacao para a Ciencia e Tecnologia -Portugal) in the scope of the project UID/EEA/04436/ 2013 and EXCL/EMS-TEC/0460/2012.
27 CitationsSource
Cited By3
Newest
#1Yu Zhao (Chang'an University)H-Index: 1
#2Yuansong Chen (Chang'an University)H-Index: 1
Last. Yongjun Zhou (Chang'an University)H-Index: 1
view all 3 authors...
Abstract In order to develop FDM additive manufacturing and promote the application of this technology, the essential mechanical properties including tensile strength and elastic property of PLA material fabricated by FDM additive manufacturing are studied deeply this time. Two novel theoretical models have been built to predict the tensile strength and Young's modulus of FDM additive manufacturing PLA material with different printing angles and layer thicknesses in this study. Firstly, strength...
36 CitationsSource
#1Li Zhao (Sichuan University)H-Index: 3
#2Xuan Pei (Sichuan University)H-Index: 8
Last. Xingdong Zhang (Sichuan University)H-Index: 57
view all 9 authors...
Abstract Bone defect and osteoporosis are common in clinic which are seriously harmful for public health. Bionic bone tissue engineering scaffolds are very important for bone tissue repair and reconstruction. In this study, different bionic bone tissue engineering scaffolds were constructed by computer-aided design and fabricated by selected laser melting. Novel porous structures were designed by using parameterization modeling. The accurate models with key characteristics such as porosity and t...
33 CitationsSource
#1Tuan Ngo (University of Melbourne)H-Index: 48
#2Alireza Kashani (University of Melbourne)H-Index: 14
Last. David Hui (UNO: University of New Orleans)H-Index: 77
view all 5 authors...
Abstract Freedom of design, mass customisation, waste minimisation and the ability to manufacture complex structures, as well as fast prototyping, are the main benefits of additive manufacturing (AM) or 3D printing. A comprehensive review of the main 3D printing methods, materials and their development in trending applications was carried out. In particular, the revolutionary applications of AM in biomedical, aerospace, buildings and protective structures were discussed. The current state of mat...
1,430 CitationsSource