Engineering

Organic chemistry

Chemistry

Polymer chemistry

Materials science

Ketone

Polyphosphazene

Ether

Membrane

Chemical engineering

Polymer

Biochemistry

Thermal stability

Peek

Journal of Membrane Science

Two series of membranes A and B were designed and prepared by the following synthesis protocols where the cross-linked membranes were composed of highly sulfonated poly(ether ether ketone) (SPEEK) as the acidic component and polyphosphazenes backbone as the basic component. Membrane A was synthesized based on the graft-onto reaction between brominated poly[(4-methoxyphenoxy)(4-methylphenoxy)phosphazenes] (PMMP-Br) and SPEEK3 polymers, while membranes B were obtained by the reaction of bromomethyl groups of polyphosphazenes with triethylamine and simultaneously combined with various amounts of SPEEK3. All the membranes were characterized chemically, thermally, and mechanically by a set of technical means. Polyphosphazenes were found to constrain to a large extent the water uptake and swelling when blended with highly sulfonated PEEK providing sufficient mechanical strength without over-swelling. Specially, the advent of sulfonated single-walled carbon nanotubes (SCNT) in the membrane A led to the hybrid membrane A2:1-SCNT with favorable properties. It exhibited a satisfying proton conductivity of 0.132 S cm−1 at 80 °C and a very low methanol permeability of 2.16×10−7 cm2 s−1, and retained considerable thermal stability as well as mechanical strength. Also, the fuel cell performance of A2:1-SCNT at 25 °C was higher than that of recast membrane A2:1.

Novel proton conducting membranes based on cross-linked sulfonated polyphosphazenes and poly(ether ether ketone)