THE Coatings
IF
2.88
Papers
4,537
Papers 4,416
1 page of 442 pages (4,416 results)
#1Jinseon YouH-Index: 1
#2Sung Min LeeH-Index: 6
Last. Suk Tai ChangH-Index: 24
view all 4 authors...
Transparent conducting electrodes (TCEs) formed with silver nanowires (AgNWs) have attracted attention as substitutes for indium tin oxide (ITO). However, the randomly deposited AgNW film performs poorly in terms of the transmittance and sheet resistance to serve as a substitute of ITO. To improve the performance of the AgNW film, we fabricated a grid-patterned AgNW by modifying the surface energy of the substrate. The hydrophobized surface was selectively etched by UV light through a quartz chr...
Source
#1Irini FurxhiH-Index: 7
#2Alessio VaresanoH-Index: 23
Last. Magda BlosiH-Index: 24
view all 7 authors...
In this paper, we exhibit how to construct a template for capturing antimicrobial capacity data of nanomaterials or nanoenabled products. The template promotes the principles of making data scientifically findable, accessible, interoperable and reusable (FAIR), encouraging scientists to reuse it. The template construction roadmap entails the following steps: (1) recognize appropriate stakeholders, (2) allocate surveys to collect a general explanation of the data that will be created, (3) compreh...
Source
#1Haobo MaoH-Index: 3
#2Fuqiang ShenH-Index: 6
Last. Tianbiao TanH-Index: 2
view all 9 authors...
TiC ceramics have become one of the most potential ultra-high temperature structural materials, because of its high melting point, low density, and low price. However, the poor mechanical properties seriously limit its development and application. In this work, this review follows PRISMA standards, the mechanism of the second phase (particles, whiskers, and carbon nanotubes) reinforced TiC ceramics was reviewed. In addition, the effects of the second phase on the microstructure, phase compositio...
Source
view all 4 authors...
Poly (3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) is known for its potential to replace indium–tin oxide in various devices. Herein, when fabricating finger-type PEDOT:PSS electrodes using conventional photolithography, the cross-sectional profiles of the patterns are U-shaped instead of rectangular. The films initially suffer from non-uniformity and fragility as well as defects owing to undesirable patterns. Adding a small amount of hydrolyzed silane crosslinker to PEDOT:PSS s...
Source
view all 5 authors...
In the present research, photo-responsive controlled-release hexaconazole (Hex) nanoparticles (Nps) were successfully prepared with azobenzene (Azo)-modified bimodal mesoporous silica (BMMs), in which β-cyclodextrin (β-CD) was capped onto the BMMs-Azo surface via host–guest interactions (Hex@BMMs/Azo/β-CD). Scanning electron microscopy (SEM) confirmed that the nanoparticles had a spherical structure, and their average diameter determined by dynamic light scattering (DLS) was found to be 387.2 ± ...
Source
#2Essam B. MoustafaH-Index: 13
Last. Ammar H. ElsheikhH-Index: 29
view all 4 authors...
In the current investigation, AA2024 aluminum alloy is reinforced by alumina nanoparticles using a friction stir process (FSP) with multiple passes. The mechanical properties and microstructure observation are conducted experimentally using tensile, microhardness, and microscopy analysis methods. The impacts of the process parameters on the output responses, such as mechanical properties and microstructure grain refinement, were investigated. The effect of multiple FSP passes on the grain refine...
Source
#1Umair KhanH-Index: 15
#2Jamel BouslimiH-Index: 1
Last. Mohamed R. EidH-Index: 27
view all 7 authors...
Aluminum nanoparticles are suitable for wiring power grids, such as local power distribution and overhead power transmission lines, because they exhibit high conductivity. These nanoparticles are also among the most utilized materials in electrical field applications. Thus, the present study investigated the impact of magnetic field on 3D crossflow in the streamwise direction with the impacts of Dufour and Soret. In addition, the effects of activation energy and chemical reaction were incorporat...
Source
#2Lin PanH-Index: 1
view all 7 authors...
The hydraulic support column bears loading and makes reciprocating motion ceaselessly for extended periods, so its service life is far shorter than that of the overall hydraulic support. This paper offers a comparative study on the surface coating of hydraulic support columns with hard chrome plating and high-velocity oxygen fuel (HVOF) thermal spraying refabricating to analyze the impact of different refabricating processes on the microstructure, hardness, corrosion resistance, and wear resista...
Source
#1Oleg A. TestovH-Index: 1
#2Andrey E. KomlevH-Index: 1
Last. Igor O. TestovH-Index: 1
view all 7 authors...
Nickel films of 4–250 nm thickness were produced by DC magnetron sputtering onto glass and silicon substrates. The electrical properties of the films were investigated by the four-probe method and the surface morphology of the films was studied by atomic force microscopy. To measure the shielding effectiveness, a portable closed stand based on horn antennas was used. A theoretical assessment of the shielding effectiveness of nickel films of various thickness under electromagnetic radiation of a ...
Source
view all 7 authors...
This study focuses on analyzing the curing reaction mechanism of polyurethane (PU) binders and comprehensively evaluating the PU mixture’s properties. The former was investigated by conducting a Fourier transform infrared spectroscopy (FTIR) test on PU binders with different curing times. The volume change characteristics, construction operation time, and strength formation law were clarified through the splitting tensile test of PU mixtures under different environmental conditions. The optimal ...
Source
12345678910
Top fields of study
This website uses cookies.
We use cookies to improve your online experience. By continuing to use our website we assume you agree to the placement of these cookies.
To learn more, you can find in our Privacy Policy.