Ricardo Orozco-Cruz
Universidad Veracruzana
Artificial seawaterAnalytical chemistryElectrochemical cellComposite materialElectrodeMetallurgyMaterials scienceTurbulenceSeawaterPolarization (electrochemistry)Cathodic protectionCorrosionScanning electron microscopeElectrochemical noiseCarbon steelRust converterReference electrodeElectrochemistryDielectric spectroscopyAnodeSaturated calomel electrode
49Publications
5H-index
131Citations
Publications 49
Newest
#1D. Cruz-Moreno (Universidad Autónoma de Nuevo León)H-Index: 1
#2G. Fajardo (Universidad Autónoma de Nuevo León)H-Index: 8
Last. C. Ramos-Rivera (Universidad Autónoma de Nuevo León)H-Index: 1
view all 5 authors...
Abstract This study evaluated the multifunctional properties that develop during curing on the surfaces of Portland cement-based mortars from using silicon-based nanoparticles (NS) and functionalized nanoparticles (NF). The durability and hydrophobicity were used as indices to determine the performance. Mortar specimens were manufactured with a water to cement (w/c) ratio of 0.65, and different treatments were applied with combinations of 0.1% NS and NF relative to the weight of the water used f...
1 CitationsSource
Last. Antonio ContrerasH-Index: 8
view all 6 authors...
The effect of different cathodic potentials applied to the X70 pipeline steel immersed in acidified and aerated synthetic soil solution under stress using a slow strain rate test (SSRT) and electrochemical impedance spectroscopy (EIS) was studied. According to SSRT results and the fracture surface analysis by scanning electron microscopy (SEM), the steel susceptibility to stress corrosion cracking (SCC) increased as the cathodic polarization increased (Ecp). This behavior is attributed to the an...
1 CitationsSource
Source
view all 5 authors...
Source
Last. Ricardo Orozco-CruzH-Index: 5
view all 6 authors...
Source
view all 5 authors...
Source
Source
Source
#1Luis Zamora PeredoH-Index: 1
view all 6 authors...
ZnO nanostructures obtained by electrochemical anodization of Zinc foil under voltage between 2.5 and 15 V, anodization time 1-5 min and thermal treatment at different temperatures (100-400 °C) were studied by Raman spectroscopy and electronic scanning microscopy. By scanning electron microscopy, it was found that at low values (time and voltage) nanoflowers with lengths close to 2 µm and diameters less than 100 nm are obtained, while at high values nanowires with lengths greater than 3 µm and d...
Source
Last. Ricardo Orozco-CruzH-Index: 5
view all 5 authors...
Source