Shuqin Li
Nanjing University of Aeronautics and Astronautics
Izod impact strength testComposite numberPorous mediumIrradiationAnalytical chemistryIon platingPermeability (electromagnetism)Glass transitionCuring (chemistry)Isothermal processDielectricNichromeIonAdsorptionDislocationComposite materialHigh-? dielectricIndentation hardnessTribologyTribocorrosionFlexural strengthMetallurgyMaterials scienceSolid solution strengtheningCorrosionIonic bondingScanning electron microscopeMontmorilloniteAluminium phosphateLayer (electronics)OxideMixed oxideAlloyCoatingPlasma surfaceGlow plasmaMelt viscosityAlloy coatingGrapheneCompressive strengthResidual stressIon implantationSubstrate (electronics)Elastic modulusPolymerOxygenDiffusionPowder metallurgyMicrostructureYttria-stabilized zirconia
9Publications
3H-index
51Citations
Publications 9
Newest
#1Xinbin Zhu (NUAA: Nanjing University of Aeronautics and Astronautics)
#2Bo Dang (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 2
Last. Shuqin Li (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 3
view all 6 authors...
Source
#1Dongbo Wei (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 15
#2Xiaoyong Zhou (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 25
Last. Pingze Zhang (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 20
view all 6 authors...
Source
#1Dongbo Wei (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 15
#2Meng Li (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 55
Last. Pingze Zhang (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 20
view all 6 authors...
The NiCr/YSZ coating was fabricated on γ-TiAl alloy by double glow plasma surface metallurgy technology and multi-arc ion plating technology. The microstructure, microhardness, bonding strength, and burn resistance of NiCr/YSZ coating were studied in detail. The results showed that the NiCr/YSZ coating was dense and homogeneous, including a duplex structure of top YSZ ceramic coating and underlying Ni-Cr bond coating. The average microhardness of NiCr/YSZ coating was raised by a factor of about ...
Source
#1Dongbo Wei (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 15
#2Fengkun LiH-Index: 4
Last. Pingze ZhangH-Index: 20
view all 8 authors...
Ta–W co-alloying was realized by double glow plasma surface metallurgy technology, and their effects on high-temperature oxidation behavior of γ-TiAl were studied. Ta–W co-alloying coating was composed of a deposited layer and interdiffusion layer. The results of isothermal oxidation experiment indicated that a compact mixed oxide film of Ta and W was formed on the sample. The interdiffusion layer reduced the oxygen intrusion that improved the high-temperature oxidation resistance of γ-TiAl. The...
Source
#1Dongbo Wei (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 15
#2Fengkun Li (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 4
Last. Zhengjun Yao (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 29
view all 8 authors...
Abstract Cr ions with doses of 3.56, 5.53 and 7.12 × 1016 ions/cm2 were implanted on the TC18 alloy by ion implantation technique. Its effects on the surface morphology, lattice deformation, residual stress, nanomechanical and fatigue behavior were studied in detail. Results showed that irradiation damage and cascade collision during Cr implanted reduced the roughness of TC18 alloy, from the 114.61 nm to the minimum 36.74 nm at 5.5 × 1016 ions/cm2 dose. Surface XRD test indicated the diffraction...
Source
#1Feng Ding (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 6
#2Shuqin Li (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 3
Last. Zhangzhong Wang (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 5
view all 7 authors...
ABSTRACTIn this work, a special water-based aluminium phosphate (WAP) coating containing primer and finishing layers was applied on 300M steel. The curing temperature of the primer layer was about ...
Source
#1Dongbo Wei (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 15
#2Liang Hongxuan (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 3
Last. Pingze ZhangH-Index: 20
view all 8 authors...
Source
Porous materials have specific properties, such as high surface area, high permeability, lightweight, and low thermal conductivity. In foaming process of thermoplastics, high melt viscosity is indispensable. Neither poly(lactic acid) (PLA) nor poly(butylene succinate) (PBS) has sufficient melt viscosity. In this manuscript, Organophilic montmorillonite (OMMT) was employed to improve the foaming performance PLA/PBS blends. Mechanical tests were undertaken to compare the performance change of PLA/...
Source
#1Jintang Zhou (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 20
#2Zhengjun Yao (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 29
Last. Shuqin Li (NUAA: Nanjing University of Aeronautics and Astronautics)H-Index: 3
view all 5 authors...
Abstract A composite of graphene/bismaleimide (BMI)/2,2′-diallylbisphenol A (BA) with high dielectric constant was prepared. Dielectric measurements, DMA analysis, and micro-analysis were conducted to assess the dielectric and thermal performances of the composite. Results show that for a composite of 4 wt% ionic liquid-treated graphene/BMI/BA, the dielectric constant reaches up to 1001.4, whereas the dielectric loss factor is only approximately 0.004. These characteristics are significantly bet...
Source
This website uses cookies.
We use cookies to improve your online experience. By continuing to use our website we assume you agree to the placement of these cookies.
To learn more, you can find in our Privacy Policy.