Dean Shi
Hubei University
Composite numberAdsorptionCopolymerComposite materialEpoxyNanotechnologyChemistryPolymer blendPolymer chemistryPolyamideMaterials scienceMaleic anhydrideLithium-ion batteryGrapheneChemical engineeringPolymerElectrochemistrySupercapacitorElectrolyteNanocomposite
Publications 47
#1Yang Hu (Huda: Hubei University)
#2Chao Chen (HUST: Huazhong University of Science and Technology)H-Index: 59
Last. Xiaolin Xie (HUST: Huazhong University of Science and Technology)H-Index: 32
view all 8 authors...
Abstract Epoxy (EP) composites with comprehensive good processability, low coefficient of thermal expansion (CTE), and high thermal conductivity, but electrical insulation properties are largely demanded in the higher power electric devices. However, micro-fillers have a positive effect on maintaining the good flowability of epoxy composites, while do not bring high thermal conductivity enhancement per unit mass. While nano-fillers with high specific surfaces offer very promising opportunities f...
#1Litao Huang (Huda: Hubei University)
#2Jianwen Chen (Hangzhou Normal University)
Last. Yutian Zhu (Hangzhou Normal University)H-Index: 19
view all 7 authors...
Abstract Low-cost production of piezoresistive strain/pressure sensor with high sensitivity, fast response, good stability and repeatability is still one of the critical challenges for the practical applications of flexible piezoresistive materials in human motion detection, health monitoring, wearable electronics, and e-skins. Herein, we develop a simple and efficient route to fabricate the three-dimensional (3D) light-weight piezoresistive sensing materials via the surface coating the polyuret...
#1Qing Zhang (Huda: Hubei University)H-Index: 76
#1Qing ZhangH-Index: 9
Last. Yingkui YangH-Index: 28
view all 7 authors...
Redox-active carbonyl polymers have been intensively explored as promising high-capacity cathode alternatives to traditional inorganic materials for metal-ion batteries. Despite inspiring achievements, practical implementation is severely restricted by their intrinsic electronic insulation and insufficient utilization of carbonyl active sites. Herein, an efficient hydrothermal polycondensation of dianhydride and diamine co-monomer salts was readily performed in the presence of graphene oxide and...
#1Kaihua Yang (Huda: Hubei University)H-Index: 1
#2Youshuang Zhou (Huda: Hubei University)H-Index: 1
Last. Jun You (Huda: Hubei University)H-Index: 2
view all 10 authors...
Traditionally, energy-intensive and time-consuming postmechanical disintegration processes are inevitable in extracting biopolymer nanofibrils from natural materials and thereby hinder their practical applications. Herein, a new, convenient, scalable, and energy-efficient method for exfoliating nanofibrils (ChNFs) from various chitin sources via pseudosolvent-assisted intercalation process is proposed. These self-exfoliated ChNFs possess controllable thickness from 2.2 to 0.8 nm, average diamete...
1 CitationsSource
#1Xue-Qing Zhan (Huda: Hubei University)H-Index: 4
#2Ya Zhang (Huda: Hubei University)H-Index: 1
Last. Fang-Chang Tsai (Huda: Hubei University)H-Index: 14
view all 12 authors...
Abstract Due to the relatively excellent chemical and hydrothermal stability as well as structural stability, UiO-type PCPs exhibit good adaptability in the humid and acid atmosphere. Considering that, we anchored this type of materials to study their structural properties and adsorption behavior. Concretely, we have synthesized UiOs with different pore diameters by employing different length organic ligand and prepared magnetic functional Fe3O4@UiOs by encapsulation. In this paper, we have stud...
1 CitationsSource
#1Bo Ruan (Huda: Hubei University)H-Index: 2
#2Jie Yang (Huda: Hubei University)H-Index: 1
Last. Fang-Chang Tsai (Huda: Hubei University)H-Index: 14
view all 7 authors...
Abstract The fluorescent dye molecules have gained wide attention for their applications in areas such as imaging and sensor. However, the properties of the fluorescent dyes are limited due to the built-in problems such as the aggregation-caused quenching (ACQ). Herein, a fluorescent dye@MOF was developed by encapsulating fluorescent dye molecules into the channels of metal-organic frameworks (MOFs) to disperse them. This composite material SRB@UiO-66, equipping appreciable stability, was succes...
4 CitationsSource
#1Yuan-long Wu (Huda: Hubei University)H-Index: 1
#2Wei She (SEU: Southeast University)H-Index: 2
Last. RobertK.Y. Li (CityU: City University of Hong Kong)H-Index: 1
view all 9 authors...
Abstract Efficient anti-icing techniques are of great implications in many fields of our society. In this work, multi-functional copolymers containing siloxane units are designed to prepare durable anti-icing coating. The presence of siloxane groups endows the copolymers with triggered self-crosslinking ability, strong self-adhesiveness and high structural stability in severe conditions, which further enhanced the mechanical/chemical durability of the composite coatings. The optimal composite co...
2 CitationsSource
#1Ran Zhang (Huda: Hubei University)
#2Zhaoyang Wei (Huda: Hubei University)
Last. Dean Shi (Huda: Hubei University)H-Index: 17
view all 6 authors...
#1Qi Tang (Huda: Hubei University)H-Index: 2
#2Kang Wang (Huda: Hubei University)H-Index: 1
Last. Dean Shi (Huda: Hubei University)H-Index: 17
view all 7 authors...
Abstract Antibacterial polymer membranes have been widely used in many fields of our daily life. In this study, porous PA6 membrane with ZnO nanoparticles attaching on to the surface of inner pore walls is prepared. Firstly, SMA (styrene maleic anhydride copolymer) is used to graft onto the surface of ZnO nanoparticle in DMF (dimethylformamide). Then the pre-treated ZnO nanoparticles (ZnO-SMA) are added into SEBS (Styrene-ethylene-butylene-styrene copolymer)/PA6 (60/40 wt/wt) blends with co-cont...
2 CitationsSource